The Beo5 & Beo6 Remote Forum

Re: B& O remotes 1000 and Beo4.

PerroMal — Mon, 29 Aug 2011 09:49:00 GMT

Hi Stefan,

This worked OK. Sorry about the late reply.

Regards

PerroMal

Re: B& O remotes 1000 and Beo4.

PerroMal — Mon, 29 Aug 2011 09:47:45 GMT

Hi Teddy Fr.

Sorry this is a very late reply but thank you for the advice. Works OK

PerroMal

Re: B& O remotes 1000 and Beo4.

stefan — Thu, 23 Jun 2011 06:46:31 GMT

Just to add:

If you have a later Beo4, maybe with A.MEM and V.MEM buttons, and you can`t find A.TAPE2, try N.MUSIC. It`s the same command and works on a BC9500.

Stefan

Re: B& O remotes 1000 and Beo4.

Teddy_fr — Wed, 22 Jun 2011 16:41:53 GMT

Hi PerroMal !

It's very easy:
press the ||||| ● |||| button and | LIST| at the same time.
Then ADD? appears on the Beo4 screen.
Press | GO | and several times | LIST| until A.TAPE2 appears.
Then press | GO | to store this new fonction, | GO | again and |||Tape 2||| switches on on the display of the Beocenter 9500.
Enjoy your 9500, this machine is really timeless and will work either with the oldest and newest B&O equipments.

Marc

B& O remotes 1000 and Beo4.

PerroMal — Wed, 22 Jun 2011 14:17:59 GMT

I have an old B&O set up 9500 which uses the remote 1000. I have later equipment but I use the 9500 in my study linked to my PCs and TV. I use "Shift"ATape" for some functions. When using the Beo4 remote this operation won't work. I relaise that B&O make a note in the B&O manual that there is not full compatabilty between these controllers. Does anyone know of a work around.