The Beo5 & Beo6 Remote Forum

Re: BV 10-40 with BC2 settings unclear to program

OKF — Thu, 03 Mar 2011 16:43:30 GMT

Thanks, but BV10-40-PUC should be wrong...see my comment....so it does not help at all

Re: BV 10-40 with BC2 settings unclear to program

Tillquist — Thu, 03 Mar 2011 14:58:51 GMT

OKF:

Hi

I have looked at programming the Beo 5 for the following setup and some questions do arise from that (I am in Germany)

My components are/will be: BV10-40 with DVB-HD T/C/S2 Module (1846895), BC2 (it is I think MK1), IPORT FS-23 (B+O calls it System Dock) Apple TV plus link rooms with Beo Passive and another room fully equipped but not important for this here:

1. There are 2 TV's as a choice, the 'BV-10-40 PUC' and the 'BV-10-40'. When I choose the PUC one Iget CAMERA installed so I assume 'BV-10-40' is the right one to implement?

2. When I choose the 'BV-10-40' under the TV and the selected product data I get under ...

-MODULES:

--DVB-HD EU as TV

--DVB-HD EU as DTV

--DVB-HD D. CH. A (Multifeed) as TV

--DVB-HD D. CH. A (Multifeed) as DTV

--Use TV and DTV for ext. sources

Do thise settings refer to the DVB-HD T/C/S2 Module (1846895) or do I have to choose some other setting or do I need another XML-File for the DVB-HD T/C/S2 Module?

Then it also says

-NAVIGATION BUTTONS

--no Navigation Button

--Navigation Button - Mode 1

--Navigation Button - Mode 2

What is this? What does it refer to? Which to set?

3. When it comes to the BC2 I can choose that under AUDIO SYSTEM but further down in the Menue I can choose this under the DVD section which means it creates a DVD2 in the Beo5. I assume it is right just to add the BC2 from th AUDIO section?

4. When I choose the Apple Remote for the ATV under 'PUC' it does not really produce any buttons on the Beo 5 aprt from MENUE. Is this standard? The XML-File is named 'Apple_STB_Apple-Remote_V02,00a' (under STB, PUC SOURCES)

Okay, I think that is it. I would appreciate some answers and then I am set.

Thanks

That's a start for you

BV 10-40 with BC2 settings unclear to program

OKF — Tue, 01 Mar 2011 17:55:38 GMT

I have looked at programming the Beo 5 for the following setup and some questions do arise from that (I am in Germany)

My components are/will be: BV10-40 with DVB-HD T/C/S2 Module (1846895), BC2 (it is I think MK1), IPORT FS-23 (B+O calls it System Dock) Apple TV plus link rooms with Beo Passive and another room fully equipped but not important for this here:

1. There are 2 TV's as a choice, the 'BV-10-40 PUC' and the 'BV-10-40'. When I choose the PUC one Iget CAMERA installed so I assume 'BV-10-40' is the right one to implement?

2. When I choose the 'BV-10-40' under the TV and the selected product data I get under ...

-MODULES:

--DVB-HD EU as TV

--DVB-HD EU as DTV

--DVB-HD D. CH. A (Multifeed) as TV

--DVB-HD D. CH. A (Multifeed) as DTV

--Use TV and DTV for ext. sources

Do thise settings refer to the DVB-HD T/C/S2 Module (1846895) or do I have to choose some other setting or do I need another XML-File for the DVB-HD T/C/S2 Module?

Then it also says

-NAVIGATION BUTTONS

--no Navigation Button

--Navigation Button - Mode 1

--Navigation Button - Mode 2

What is this? What does it refer to? Which to set?

3. When it comes to the BC2 I can choose that under AUDIO SYSTEM but further down in the Menue I can choose this under the DVD section which means it creates a DVD2 in the Beo5. I assume it is right just to add the BC2 from th AUDIO section?

4. When I choose the Apple Remote for the ATV under 'PUC' it does not really produce any buttons on the Beo 5 aprt from MENUE. Is this standard? The XML-File is named 'Apple_STB_Apple-Remote_V02,00a' (under STB, PUC SOURCES)

Okay, I think that is it. I would appreciate some answers and then I am set.

Thanks