The Beo5 & Beo6 Remote Forum

Re: Missing Beolab Penta in Configuration Tool

francis — Thu, 19 Nov 2009 05:30:06 GMT

Peter :

Choose Beolab 1s. For TVs, it makes a difference to the amount of low bass sent to the speakers.

Thanks, Peter

That`s why the TV needs to know which speakers are connected but why should Beo5 need to know?

Re: Missing Beolab Penta in Configuration Tool

Tillquist — Wed, 18 Nov 2009 12:44:21 GMT

I have used the BeoLab 8000, but it should not make any difference what speaker you use.

Beo5 should not control your speakers and you've told your TV which speaker is connected.

Re: Missing Beolab Penta in Configuration Tool

Peter — Wed, 18 Nov 2009 12:10:31 GMT

Choose Beolab 1s. For TVs, it makes a difference to the amount of low bass sent to the speakers.

Missing Beolab Penta in Configuration Tool

francis — Wed, 18 Nov 2009 11:46:52 GMT

I have recently updated my Beo 5 Configuration Tool and had a quick look at it. I can`t find Beolab Penta any longer in the speakers list (only BL 6000 and BL 8000 from the older series are listed). I'm not sure if I remember right but I believe my old version offered Pentas also as a choice for speakers.

As I am running a 5.1 configuration with BL Pentas as front speakers, does that have any impact on controlling my system? To be honest I never understood why the config tool and the Beo5 needs to "know" which speakers are running. Does it make any difference and if so, which speaker should I choose from the list to substitute my Pentas?