The Beo5 & Beo6 Remote Forum

Re: Pb with third party product

hackel — Mon, 07 Sep 2009 12:43:34 GMT

Thank you for your answer !! It's work fine now.

I was talking about a Xml file found on this page : http://beo5.beoworld.org/Downloads.htm

And you use one found on the forum page : http://forum.beoworld.org/forums/p/26627/205791.aspx#205791

I don't know what the diference between this two file but the one you use work fine.

Thank you Keith.

Re: Pb with third party product

Keith Saunders — Mon, 07 Sep 2009 01:06:21 GMT

This is an XML file generated by a member using the XML Generator and so has ONLY screen buttons, hard keys will still use originally defined B&O codes.

I have download this file and tested it and I can confirm that it works.

In version 3.0 the IR and IR long Tab will not be visable for added 3rd party products that's why any hard key assigned needs to be done in the created XML file prior to adding to your configuration.

Below is a screen shoot of the emulator clearly showing the RAW codes being sent. I can only assume that you were using the hard keys which will send B&O codes or you have selected the PUC file. Make sure you select the file from the OTHER tab in the tool.

Pb with third party product

hackel — Sun, 06 Sep 2009 15:55:13 GMT

Hello,

I've just baught a BEO5 and I'v got the 3.0 Config tools. I try to put a third party product (Sony RDR HXD870 DVD) which I download on the BEO5 internet page.

It's like a PUC product and not a third party, because when I am in the View screen, and I test a buton, it start with CNTL_xxxx so I think this is not like it must be, because the IR tab and the IR Long Tab are not accesible.

Can you just help me for this product, that will be ok after for the other.