The Beo5 & Beo6 Remote Forum

Re: Beo5 Config Connection Problem

diggs2701 — Wed, 01 Apr 2009 09:08:16 GMT

The chipset was the problem. I put everything on another computer and it worked perfectly. Finally updated! Thank you all for your help!

Diggs2701

Re: Beo5 Config Connection Problem

TWG — Tue, 31 Mar 2009 09:11:22 GMT

It could be a hardware problem of your PC and in this case the firmware upgrade wouldn't help.

If your computer has a chipset from "SiS" there's a problem with detecting and connecting to the Beo 5 via USB.
This problem exists on every Computer using a chipset (USB-Controller etc.) from SiS.

You can check this in the device manager from Windows.

But you should upgrade the Beo 5, too. The newest firmware and tool is required and fixed some bugs.

Good luck

Re: Beo5 Config Connection Problem

diggs2701 — Tue, 31 Mar 2009 08:23:34 GMT

It has never worked on the PC I am currently using (as far a syncing my configuration I created).

So I should use the newest version of the tool (ver-2.20) to update from 1.20a to SW1.40a? So version 2.20 will work with SW1.20a?

I will try connecting directly to the computer and see if that helps. Thanks,

Diggs

Re: Beo5 Config Connection Problem

Piet van der Zalm — Tue, 31 Mar 2009 00:40:09 GMT

Diggs,

has it ever worked on the PC you are using now?

About the software: it is not possible to download the configuration with older versions of the configuration tool, if the firmware is more recent. I recommend to use the newest version you own. Latest version is firmware 1.40a and Config Tool 2.20.

In the past I have red that connecting to an USB hub could case problems.

Piet

Re: Beo5 Config Connection Problem

diggs2701 — Mon, 30 Mar 2009 08:33:53 GMT

Thank you Piet.

I tried different USB ports and turned the beo5 off before I docked it on the charger. Still nothing... I even uninstalled the driver and re-installed. Again, the beo5 seems to be working perfectly with windows xp; shows up everytime I connect, but for some reason the configuration tool doesn't recognize it is hooked up. Does the tool only look for certain USB ports? I have it hooked into a USB hub.

Also, since I have SW1.20a do I neeed a certain version of configuration tool (ex:1.00, 1.30, 2.20)?

Diggs

Re: Beo5 Config Connection Problem

Piet van der Zalm — Mon, 30 Mar 2009 01:09:21 GMT

Try a different USB port.

Try to switch off the BEO5 before connecting it to the PC. It will switch on when you put it on his stand.

Good luck.

Piet

Beo5 Config Connection Problem

diggs2701 — Sun, 29 Mar 2009 21:03:40 GMT

My Beo5 currently has sw1.20a and I am trying to upgrade it to the latest version and add my configuration. I'm having problems with the connection between the beo5 and the configuration tool. The beo5 shows up as a remote in device manager so I think it installed drivers correctly (XP Service Pack 3). When I start up the config tool it does not recognize the beo5 so there is no way to sync (says there is no beo5 connected). Any ideas? Thanks in advance!

Diggs