The Beo5 & Beo6 Remote Forum

Re: Function_

stefan — Sun, 29 Mar 2009 06:27:06 GMT

In addition to that Beo uses CNTL commands for PUC control via Beo5. For example if "GUIDE" is controled by MENU - 2 via Beo4 and GO - 2 from linkrooms it`s CNTL-2 via Beo5. The same for CNTL-0 - CNTL-9.

Stefan

Re: Function_

Keith Saunders — Fri, 27 Mar 2009 12:34:20 GMT

As far as I am aware the "Functions" have only been used with Lintronics to date and are intended for 3rd party control.

The Lintronic relay card is a good example and teh following are the "Control" and "Function" commands

CONTROL COMMANDS
Control 0 = All relays
Control 1 = Relay 1
Control 2 = Relay 2
Control 3 = Relay 3
Control 4 = Relay 4
Control 5 = Relay 5
Control 6 = Relay 6
Control 7 = Relay 7
Control 8 = Relay 8

FUNCTION COMMANDS
Function 1 = On for 1 second
Function 2 = On for 2 seconds
...
Function 30 = On for 30 seconds
Function 31 = On constantly
Function 32 = Off constantly
Function 33 = Toggle On/Off
Function 34 = Reserved
Function 35 = Reserved
Function 36 = Reserved
Function 37 = Toggle "Input 1"
Function 38 = Toggle "Input 2"

These are used with the "Light" command

Function_

emabonacchi — Wed, 04 Mar 2009 13:15:55 GMT

Hello and scuse me for my bad english....

Can someone explain me what the 'function_' command is?

I have tried to use it with a Lintronic in order to convert this command into a command to control an external set top box, but it seems to freeze.....

What is the correct use for the 'function_' command?