The Beo5 & Beo6 Remote Forum

Re: Double Click on Sony BDP

beogram4 — Sat, 04 Jul 2009 01:13:31 GMT

I created xml-file using xml-generator. I didn't see topic "The IR "Repeat signal". This is the same problem.

Keith can you explain in detail how convert "raw" in "bitstream" in xml-file (in detail) or send link on theory page )).

Re: Double Click on Sony BDP

Keith Saunders — Fri, 03 Jul 2009 11:28:09 GMT

beogram4:

But beo5 works only with double click....

I understand that..

The entry in the PUC only transmits the IR signal once and the STB needs to see a minimum of two transmisions, that's why you need to press the button twice. The problem is the PUC entry is incorrect.

Re: Double Click on Sony BDP

beogram4 — Fri, 03 Jul 2009 10:17:38 GMT

But beo5 works only with double click....

Re: Double Click on Sony BDP

Keith Saunders — Fri, 03 Jul 2009 09:41:51 GMT

Sony original remotes transmit the IR binary command string 3 times for any single command press

Re: Double Click on Sony BDP

beogram4 — Fri, 03 Jul 2009 09:31:02 GMT

Where is this parameter "NumSignalReps" situated?

I can't find it client xml.

Re: Double Click on Sony BDP

apearce — Fri, 20 Feb 2009 07:55:49 GMT

Thanks Frank, i didn't realise how that post had progressed.

Re: Double Click on Sony BDP

frank2u — Fri, 20 Feb 2009 05:44:57 GMT

Hallo,

not sure if this is corrected in the actual PUC. There is an error with the value of NumSignalReps.

http://forum.beoworld.org/forums/t/20948.aspx

Frank

Double Click on Sony BDP

apearce — Thu, 19 Feb 2009 16:41:34 GMT

Hi,

I'm having a strange issue where after three attempts at different Sony BDP codes on my Beo5, i'm still required to double click buttons for them to have any affect.

Example is the DVD menu screen, to move left and right i have to click the left small arrow (centre of remote) twice for it to move once in that direction.

My Blu-Ray is the latest BDP-S550.I have the latest firmware on the Beo5 also, BS3 firmware was probably updated last in October last year.

I'm uncertain as to if it is the remote or possibly my BS3 that has the issue. I'm hoping to rule out the remote by taking it into my dealer and putting it into dealer mode to test. Failing that i'm a bit lost as to what to look at. My dealer has tested his own Beo 5 with my Blu-Ray player, which i took into the shop, however once i got it home and tried on my own, it requires two clicks. Once playing a movie, various buttons don't work, such as stop, however double clicking left and right will FFW and RWD and double clicking on Play will play, but i'm unable to stop/pause.

Any suggestions would be greatly appreciated.