The Beo5 & Beo6 Remote Forum

Re: Beo5 software somewhere?

aabbs — Wed, 19 Nov 2008 17:43:06 GMT

Just for information,

As you will have seen from previous posts I've been struggling to get the software. As a last ditch attempt I ended up paying for a copy of 1.3 on ebay (nervous as I was about this, £50 for those who are wondering). Anyway it arrived yesterday, and all is now well and i can finally enjoy my Beo5. (ps did not have to upgrade firmware as far as I could tell?)

Managed to set up 3 zones with different pattens and external bit's in about 2 hours .

Avant, LC2's, Beolab 1, Beloab 2 beolab 6000, Digifusion 200, BeoSound 9000, BeoLab 4000, BeoPort, Beolab 3500, Apple TV

Now I've seen the software I'm even more staggered that the dealers in Newbury/Reading where making such a fuss about how complex it all is?

As far as I can see it's a simple wizard with the only slightly hard bit being getting the Beo5 work on the usb in the first place (had a code 10 which was cleared by rebooting the Beo5 and PC)

With only a few more minor tweaks this could be released to almost anyone.

I'd like to say a Big thanks to Beoworld for the downloads - makes the rest of the none standard bits a breeze

Re: Beo5 software somewhere?

aabbs — Fri, 17 Oct 2008 08:07:26 GMT

I agree but this is where B&O are doing people such a dis-service

They cannot (aka see ebay adverts for beo5) and should not try and manipulate the market by restricting the programming of a product in this way.

Re: Beo5 software somewhere?

Peter — Thu, 16 Oct 2008 16:37:54 GMT

Ridiculous. There is a fair chance it won't work as you could well have the wrong firmware anyway.

Re: Beo5 software somewhere?

aabbs — Thu, 16 Oct 2008 15:56:24 GMT

Well I hope it does some good

Just so we all know how strange it's getting I was just checking ebay for stuff and guess what someone is trying to sell software and cable for beo5 for £60 a pop.

item number: 290268233380

Re: Beo5 software somewhere?

PhilLondon — Thu, 16 Oct 2008 14:53:01 GMT

They know what we think and want... a Beo5 thread from Beoworld was shown in a official B&O meeting we were told.

Re: Beo5 software somewhere?

Jandyt — Thu, 16 Oct 2008 14:42:42 GMT

We need to start a petition!

Re: Beo5 software somewhere?

aabbs — Thu, 16 Oct 2008 07:45:06 GMT

Sorry was editing my inital post when you replied - The thing that gets me most is that they want me to pay for them to learn when they are meant to be the experts on. What they charge for this is under their control and is where the problem lies. However having the software myself removes the bug bear of having to travel to them each time I want to alter something

Re: Beo5 software somewhere?

PhilLondon — Thu, 16 Oct 2008 07:40:43 GMT

It is not the dealer's fault, they have had clear intructions from head office.

Re: Beo5 software somewhere?

aabbs — Thu, 16 Oct 2008 07:36:24 GMT

Guess What! my dealer has also refused to help (Newbury & Reading Branches).

To quote them - your configuration is very complex therefore you must pay us lots of money for us to figure out how to programme that for you) - Mind numbing they are not really capable of programming but want me to pay for them to learn??

My system is not complex Beosystem 9000 , BeoVision AVANT with FreeView , BeoPort plus some LC2 lights. I would have thought out the box?

(All I wanted was the same function I had with my Beo4 remote before the dog chewed it)

I'm also in IT/Software and know that it would be a simple job to figure out how to programme myself.

If anyone has a link to the software, please email me at aabbs@teec.org (it would be most appriciated)

For me the obvious thing has happened - dealers have figured out they can rip people off because B&O is letting them. Rather than being customer focused B&O seem to becoming dealer focused (they seem to be forgetting who pays the bills)

I was about to upgrade the TV, but I'm hacked off to the point of dumping the complete kit, I certainly wont be using Newbury Reading Branche's anymore - Anyone suggest a good friendly dealer near Berkshire

Re: Beo5 software somewhere?

Peter — Sat, 13 Sep 2008 02:31:12 GMT

There is actually another problem! B&O have released a firmware update for the Beo5 but this can only be downloaded by being attached to the dealer intranet. So even if you have the latest software, you will also need the dealer log in to get the firmware. Dealers can be persuaded to give up the software - not traceable and saves them a job - but releasing their log in to a secure site would clearly be a flagrant and obvious breech of their contract.

I can only hope that the new management see fit to release a vesion of the software to their customers.

Re: Beo5 software somewhere?

Yendys — Fri, 12 Sep 2008 20:17:52 GMT

Did anyone have any luck obtain the software?

My dealer has refused, all new people [:'(]

I have designed, cabled, installed a all equipment for a 7 room AV ML system and I work in IT, and understand you might render the Beo5 inoperable if you muck up the config but I would really like to have the software to continue to change its setup without have to drive to the shop and pay for each minor change….

Re: Beo5 software somewhere?

alexander_min — Tue, 12 Aug 2008 15:11:39 GMT

Thanks for the tip, I'll try to negotiate with the dealer. I am amazed to see how difficult it is to get this software. Can imagine it's too big to be e-mailed, but surely it's posted somewhere and someone has a link? I usually never have problems to find software when I need it. B&O is really thorough when it comes to ensuring that a great gadget becomes a commercial failure ...

Re: Beo5 software somewhere?

Spiros — Sun, 10 Aug 2008 06:14:02 GMT

To be very honest it is not of much worth in any case. In my opinion there are too many things missing. And as always, being a major fun of, the two way communication.

Can you imagine if the details of the mp3 you are listening could apear on the screen of the Beo5? And much more.

Re: Beo5 software somewhere?

YannChris — Sun, 10 Aug 2008 02:36:01 GMT

Hello Alexander,

It's a real shame, but this software is intended to dealer and only available through B&O's intranet. Furthermore, firmware updates which come with updates are also done through this intranet.

All you can do is to tell your dealer that software (and it's updates) availability as a sine-qua-non condition to your purchase of a Beo5. Some accept, some don't. It's up to them to make turnover or not.

It's to expect that if dealers report a lot of lost sales because the software is not available, B&O will finally understand that end-users, who can easlily turn to a Pronto or a Logitech product that they can easily setup, will make the software available.

Have a nice sunday... and happy negociation,

Yann.

Re: Beo5 software somewhere?

PhilLondon — Sun, 10 Aug 2008 02:33:10 GMT

Hi, You are absolutely right that the remote is not worth much if you do not have the software with it.

The software is far too big to be emailed and a Beoworld does not want to be seen as a place were the software is exchanged.

The best is to get it from your dealer. Just say that if they want your £400, they need to give you the software.

Beware that you will not get the new versions of the software when they come out.