The Beo5 & Beo6 Remote Forum

Re: Moving P&P window

stefan — Wed, 04 Jun 2008 13:37:57 GMT

Hi Yann, you are right, this function does not exist in the config tool, but the command is in my Beo5 setup for the PandP function.

You can type the words into the command field and create this way a new command.

Sorry, as I said before, I can not test the button, because I don`t have the BV with PinP.

Good luck

Stefan

Re: Moving P&P window

YannChris — Tue, 03 Jun 2008 15:27:46 GMT

Good evening, Stefan;

It did not work, as the PICTURE_IN_PICTURE function does not exist in the config tool.

Another suggestion?

Yann.

Re: Moving P&P window

YannChris — Sat, 31 May 2008 15:18:44 GMT

Good idea Stefan.

I'll try this tomorrow.

Thanks for your help,

Yann.

Re: Moving P&P window

stefan — Sat, 31 May 2008 05:34:19 GMT

Hi Yann,

try to create a button with a macro. First command is: 0:000:TV:PICTURE_IN_PICTURE, second is: 0:000:TV:CNTL_REWIND.

This is the command for PICTURE IN PICTURE - GREEN. If this works (I cannot test it, because I have no 1 way Beovision with PinP module), create 3 buttons for red, blue, yellow.

Good Luck

Stefan

Moving P&P window

YannChris — Sat, 31 May 2008 03:39:14 GMT

Hello,

As you know, moving the P&P window from one corner of the screen to another one is very easy with Beo4.

Unfortunately, it seems to be impossible with Beo5, as, when you ask for P&P, the window does not open until you have selected the secondary source (so colour-keys are not active) and when it's done the colour-keys are afected to this source.

Does anybody knows how to do the job?

Thanks by advance,

Yann.