The Workbench

Re: Slow 'fast forward' on Beocenter 1400

Peter — Thu, 22 Nov 2007 15:33:52 GMT

One 53 page service manual, in colour where required, now on site! Look here!

Re: Slow 'fast forward' on Beocenter 1400

Peter — Thu, 22 Nov 2007 13:46:07 GMT

Looks like I have found my job for tonight!!

Re: Slow 'fast forward' on Beocenter 1400

lausvi — Thu, 22 Nov 2007 12:54:15 GMT

Ok, I joined as a silver member. :)

I guess it will pay itself back, I already had a look in the manuals section and I was so excited! Looks great.

Re: Slow 'fast forward' on Beocenter 1400

lausvi — Thu, 22 Nov 2007 11:54:50 GMT

Peter:
I would take the top off. I have found the service manual - quite detailed and a fair amount of detail about the tape mechanism. You will need to join as a silver or gold member to access it. Let me know if you plan to join as I will make it a priority to scan it! It will take an evening!

I'll have a look of the recorder later this evening. Just to check how it looks like. I have opened the cover when changed the lamps but prefered not to touch the tape part. :)

I have been waiting for a strong reason to join as a silver or gold member, and I guess this would be one. I'll check it out. So I guess I would be joining soon, so the manual would be needed. No hurry! Thanks!

Re: Slow 'fast forward' on Beocenter 1400

Peter — Thu, 22 Nov 2007 11:44:47 GMT

I would take the top off. I have found the service manual - quite detailed and a fair amount of detail about the tape mechanism. You will need to join as a silver or gold member to access it. Let me know if you plan to join as I will make it a priority to scan it! It will take an evening!

Re: Slow 'fast forward' on Beocenter 1400

lausvi — Thu, 22 Nov 2007 11:16:54 GMT

Dillen:
It will probably need cleaning and lubricating of the whole mechanism, motor etc.
It's belt driven, one belt (in stock if you need).

Thanks!

I'll try to clean it first. It most likely helps as the previous owner has used the recorder a lot so it might be good idea to take a look. From which way should I open it, the top or the bottom? Or which way it's easier? I'll try cleaning first, then replace the belt if necessary

Re: Slow 'fast forward' on Beocenter 1400

Dillen — Thu, 22 Nov 2007 11:10:18 GMT

It will probably need cleaning and lubricating of the whole mechanism, motor etc.
It's belt driven, one belt (in stock if you need).

Martin

Re: Slow 'fast forward' on Beocenter 1400

Peter — Wed, 21 Nov 2007 09:41:12 GMT

I'll see if I have that manual tonight.

Slow 'fast forward' on Beocenter 1400

lausvi — Wed, 21 Nov 2007 07:22:13 GMT

Hello!

I have a Becenter 1400 (which I bought for 30 euros!). It's otherwise completely working (I did changed some lamps) but there seems to be some small troubles. Sometimes when playing a tape there is some "metallic" noise, that sounds like there were something touching the flywheel (sometimes it slows the playback speed down) and it's released by swithcing pause on and off.

Also I would like to know if the tape deck has a belt-driven mechanism or not. The reason is that the fast forward is very slow and usually stops after some twenty seconds. If it has no belt I would like to know how should I try to fix it. It might be just dirt in the rollers, in that case the question is should I open the case from the top or from the bottom. The rewind is fine.

Thanks in advance!