https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/64314.aspxSun, 18 Nov 2007 13:16:29 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:64314EOB0https://archivedforum.beoworld.org:443/forums/thread/64314.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=64314<p>I am trying to take off the module of the surround 5.1 of a BC1.</p><p>Due to the fact that some ( the upper ) of the attaching pins are broken the module as it is top heavy keeps dropping off.</p><p>I still have the original cap with out the module which doesnt need the pins and until I have ordered a new part I want to use at least the unit for TV etc. If I can get the module off its possible to close it up with the original cap.&nbsp;</p><p>Problem is I am unsure how the module is connected? So before I ruin something I guess some advice is very welcome.</p><p>As I see it the best way is to disconnect the module from the BC1 itself. I see a grey sort of connector with something that seems a safe- click system. its possible to manouvre it so it unlocks ?. So my guess is that it will free the connector from its base. If I am right the module is attached to the BC1 with a slim grey connector?&nbsp;When pulled the connector doesnt give way though ?</p><p>Am I missing something or should I use more force? All is not in the easiest spot and the connector seems a bit fragile?</p><p>&nbsp;</p><p>Hopefully&nbsp;some one can help me out here,.....</p><p>Regards EOB&nbsp;</p><div style="clear:both;"></div>