https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/58327.aspxFri, 26 Oct 2007 05:53:52 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:58327cozza0https://archivedforum.beoworld.org:443/forums/thread/58327.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=58327<p>The two capacitors inside the IR receiver metal shielding are&nbsp;prone to failure&nbsp;in my experience. The value is 22 microfarad, 16 volt. I wouldn&#39;t replace the others unless they tested bad with an ESR meter. </p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/57900.aspxWed, 24 Oct 2007 13:28:37 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:57900Die_Bogener0https://archivedforum.beoworld.org:443/forums/thread/57900.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=57900<p>Not all 5 capacitors are always defect... already one of them can cause this bad effect. But it makes no sense, exchanging just one of them... hmmm, which one one is now the defect one? You can&#39;t test or measure it. So exchange all of them.</p><p>The parts are cheap, we are talking around 50 cents...and 2 hours skilled&nbsp;work on very tiny parts. One miniature 1uf capacitor is around 7 cents...</p><p>The necessary values are all printed on the original SMD parts, i dont remember now&nbsp;the values, but every repair shop has this parts on stock.</p><p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/57700.aspxTue, 23 Oct 2007 19:17:31 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:577009 LEE0https://archivedforum.beoworld.org:443/forums/thread/57700.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=57700Moved to &quot;Workbench&quot; !!<div><br class="khtml-block-placeholder" /></div><div><img src="http://forum.beoworld.org/emoticons/02.gif" alt="Big Smile" /></div><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/57300.aspxMon, 22 Oct 2007 09:11:58 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:57300AAVALENTA0https://archivedforum.beoworld.org:443/forums/thread/57300.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=57300<p>HI GUYS!</p><p>MY BEOLINK 700 STOPPED RESPONDING, I WAS TOLD THE SMD CAPACITORS NEED TO BE REPLACED.&nbsp;</p><p>WHAT TYPE OF&nbsp; SMD CAPACITORS SHOULD I BUY AS A REPLACEMENT? AND ALSO SHOULD I REPLACE ALL 5 OR JUST THE 2 VERTICAL ON THE LEFT FROM THE&nbsp; IR TRANSMITTERS?? WOULD YOU HAVE ANY NUMBER AND (OR) SPECS WHEN I GO TO THE ELECTRONICS STORE TO TELL THEM WHAT IS THAT I NEED?<br /></p>AGAIN MANY THANKS FOR YOUR ADVISE?<div style="clear:both;"></div>