https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/46989.aspxTue, 18 Sep 2007 06:18:34 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:46989Alex Barnett0https://archivedforum.beoworld.org:443/forums/thread/46989.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=46989That&#39;s great, thanks guys - D&#39;you know, I didn&#39;t realise &quot;Display&quot; and &quot;system&quot; were two separate buttons... they&#39;re so close together I thought it referred to &quot;Display system&quot;.... <img src="http://forum.beoworld.org/emoticons/07.gif" alt="Unsure" />&nbsp; All sorted now, the Beocentre is back under control of the Uberkommander.<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/46708.aspxMon, 17 Sep 2007 07:15:50 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:46708Peter0https://archivedforum.beoworld.org:443/forums/thread/46708.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=46708The BL7000 essentially sets itself up. If you change your system, go into the Panel/Setup/Systems/Components section as detailed above and remove all the components. Save this and then going into exactly the same place, add those components you have. The Beolink 7000 sends out a test signal and if it gets a response, the component is stored as 2 way, and if it gets no response, one way. Clever these Danes!<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/46702.aspxMon, 17 Sep 2007 06:42:44 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:46702PhilLondon0https://archivedforum.beoworld.org:443/forums/thread/46702.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=46702PANEL, then SETUP, then SYSTEM, then COMPONENTS<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/46700.aspxMon, 17 Sep 2007 06:40:02 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:46700Alex Barnett0https://archivedforum.beoworld.org:443/forums/thread/46700.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=46700Duh... does anybody know how to get into the system setup on the Beolink 7000? I&#39;d like to set mine to 1-way control for the time being, as I&#39;ve just sold my Beovision MX5500 and there&#39;s only my Beocentre 8500 to use it with now! Thanks - Alex.<div style="clear:both;"></div>