The Workbenchhttps://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)Re: Redline 140 floor stands repaint?https://archivedforum.beoworld.org:443/forums/thread/360624.aspxMon, 27 Feb 2012 12:02:51 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:360624Blackrix0https://archivedforum.beoworld.org:443/forums/thread/360624.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=360624<p>I think satin. When I do a repaint I just use the colour paint and no clear varnish to get the satin look.</p><div style="clear:both;"></div>Re: Redline 140 floor stands repaint?https://archivedforum.beoworld.org:443/forums/thread/360552.aspxMon, 27 Feb 2012 01:09:36 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:360552Jimburg0https://archivedforum.beoworld.org:443/forums/thread/360552.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=360552I&#39;m wondering what finish would look best- Matt, gloss, satin?<div style="clear:both;"></div>Re: Redline 140 floor stands repaint?https://archivedforum.beoworld.org:443/forums/thread/360397.aspxSun, 26 Feb 2012 02:51:29 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:360397Blackrix0https://archivedforum.beoworld.org:443/forums/thread/360397.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=360397<p><span>I always go to a store and look for a spraycan of carpaint which is very close to the original. You will not see the slight difference if you repaint the complete stands.</span></p><div style="clear:both;"></div>Redline 140 floor stands repaint?https://archivedforum.beoworld.org:443/forums/thread/360391.aspxSun, 26 Feb 2012 01:32:23 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:360391Jimburg0https://archivedforum.beoworld.org:443/forums/thread/360391.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=360391<p>I am starting to restore a pair of redline 140s and the stands have quite a bit of rust and paint missing. Does anyone have any ideas how I could repaint to either a very similar finish to the original, or something that would look suitable for the black redlines?</p> <p>Any ideas appreciated.</p><div style="clear:both;"></div>