https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/360834.aspxTue, 28 Feb 2012 13:33:06 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:360834Beobuddy0https://archivedforum.beoworld.org:443/forums/thread/360834.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=360834<p>If there is a ML device attached, disconnect the ML on the back.</p> <p>It can also happen if there is a beoport module. Things can be mixed up.</p> <p>This was for me the reason for slow response of the tv.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/359161.aspxFri, 17 Feb 2012 11:36:32 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:359161Blackrix0https://archivedforum.beoworld.org:443/forums/thread/359161.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=359161<p>I have had a simular problem with my Avant DVD, picture OK, but operation was very slow. Even though the picture was OK, the tube was the cause of the problem........</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/359115.aspxFri, 17 Feb 2012 04:14:33 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:359115widerstand0https://archivedforum.beoworld.org:443/forums/thread/359115.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=359115<p>Hello!</p> <p>I just got this problem with my avant:</p> <p>From mains powered on, it can be switched on, everything is allright, picture 100% sharp and clear, no flyback lines.</p> <p>Sound is okay, crisp and no hisses.</p> <p>when i want to change mode(VCR, Camcord), or switch channels, it just freezes, for example it changes the channel, sound is okay, but pciture appers 20 seconds later.</p> <p>contorls dont work, e.g. if i want to change volume it lags, minutes later it appers on the little red display.</p> <p>anythng pressed on the remote, the little red lcd becomes more lit up(so active, that command is recived).</p> <p>has anyone met this problem before?</p> <p>my set has never been serviced, it&#39;s 100% original.</p> <p>Greetings</p> <p>widerstand</p><div style="clear:both;"></div>