https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/335188.aspxWed, 17 Aug 2011 15:30:00 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:335188widerstand0https://archivedforum.beoworld.org:443/forums/thread/335188.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=335188<p>Anyone: so no idea how to use the PAL-I in B/G territory? :)</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/334446.aspxFri, 12 Aug 2011 02:07:56 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:334446widerstand0https://archivedforum.beoworld.org:443/forums/thread/334446.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=334446<p>Hello!</p> <p>I have just a bught an Avant Type 8133 on an auction site.</p> <p>I live in Hungary, our PAL system is B/G, but the set has the PAL-I system. I can not tune in stations with cable TV with sound, only with picture and white noise.</p> <p>According to the service manual, many Type revisions share the same I/F board, the PCB 8008326.</p> <p>So I tried to change the in Service menu the Region value, so it can tune many PAL standards.</p> <p>But it can&#39;t.</p> <p>With B/G setup, it tunes, and gets sound with white noise.</p> <p>So, the question is:</p> <p>do i need to buy an add-on board 8008325, to make the set tune in perfectly, or should it be enough to set it up in the software way, and there&#39;s something bad with my tv set?</p> <p>&nbsp;</p> <p>other thing:</p> <p>it has just switched off once(after hours of use), service menu says: Last TV Error 84-2, Last ML/SL error: CI.</p> <p>&nbsp;</p> <p>looking forward to the wise replies!</p> <p>&nbsp;</p> <p>Zsolt</p><div style="clear:both;"></div>