https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/333451.aspxTue, 02 Aug 2011 13:34:59 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:333451Ulf0https://archivedforum.beoworld.org:443/forums/thread/333451.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=333451<p>Some time ago,</p> <p>but, yes, i have....</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/333446.aspxTue, 02 Aug 2011 12:27:49 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:333446stefan0https://archivedforum.beoworld.org:443/forums/thread/333446.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=333446<p>It`s much easier. If you have a Revox recorder:&nbsp;http://revoxbeo.homepage.bluewin.ch/1839.html</p> <p>Or a Lintronic box should do it. just connect datalink pin of the 7pin audio link cable to the IR input of the TT 455. I tested that with datalink pin on Scart socket at Beovisions and it works. But I never tried that on Beomasters.</p> <p>www.lintronic.dk</p> <p>Stefan</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/333405.aspxTue, 02 Aug 2011 05:49:42 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:333405jrantala0https://archivedforum.beoworld.org:443/forums/thread/333405.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=333405<p>I am wondering if anyone has ever wanted to have a good reel to reel tape recorder connected to their Beosystem, and then worked on how to control it remotely via Beosystems Datalink ?</p> <p>There has been some discussions on deciphering the Datalink protocol and building a controller device based on some or other microprocessor from scratch, but isn&#39;t there an easier way: stripping microprocessor board and other Datalink components out of an old &quot;donor&quot; Beocord and attaching them to some relay controlled tape recorder ?</p> <p>Take e.g. some Beocord 5000/5500 type machine which has already relays operating the cassette mechanism and wire these to a reel to reel machine. In its simplest form only play, stop, rec, rewind and ff are needed to make a completely working system. Also, it should be quite easy to wire tape recorders operating switches to the Beocords microprocessor board to provide two-way operation as well.</p> <p>Any thoughts on that ? Has anyone tried something like that and with what results ?</p> <p>-jari</p><div style="clear:both;"></div>