https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/333381.aspxTue, 02 Aug 2011 01:27:28 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:333381ipaul0https://archivedforum.beoworld.org:443/forums/thread/333381.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=333381<p>My bet is the tube is gone (as usual with these...) and has nothing to do with what you did...</p> <p>You could try to get the tube fixed by &#39;&#39;glowing and tapping&#39;&#39; (done by someone who knows about this): nothing gained, nothing lost...or replace the tube (which i could do for around 200 inc new tube so maybe also someone in your region).</p> <p>Regards,</p> <p>Paul.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/333042.aspxSat, 30 Jul 2011 15:24:24 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:333042Maurice 0https://archivedforum.beoworld.org:443/forums/thread/333042.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=333042<p>HiI have been given a beovision 3/32 today which has the following problem which I have just made a LOT worse. Initially it just dropped a green colour as it warmed up, when right the picture was great which i saw for about a 1/2 hr.&nbsp; i then removed the back and looked around it appeared not to dirty so i Carefully applied power... redish mostly picture with bright red flyback lines.... I then Gently dusted the tube neck pcb with a paint brush it shorted then the set cut out!!!! yes very stupid of me! it will now only respond to remote on /off after removed from power for a few mins. It will power up with only red screen with flyback linesfor approx 5 seconds then shut down... </p> <p>any help much appreachiated</p> <p>Regards Maurice</p> <p>&nbsp;</p><div style="clear:both;"></div>