https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/330673.aspxThu, 07 Jul 2011 04:51:15 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:330673JC0https://archivedforum.beoworld.org:443/forums/thread/330673.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=330673<p>Hi Tom, more likely that the cable has stretched over time. Common on older overtures and can be tightened. Think it tells you how to in the service manual.</p> <p>&nbsp; Jonnie</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/330607.aspxWed, 06 Jul 2011 10:07:26 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:330607Tomvdw0https://archivedforum.beoworld.org:443/forums/thread/330607.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=330607<p>Hi,</p> <p>my new bought 2nd hand Ouverture have problems with its sliding mechanism - sometimes the doors closes not completely, the gap between differs between 2 - 60 milimeter when 2 mm are fine and normal. I cleaned up the running rails already but I assume, it might be a problem with the rubber band - as the prev. owner were heavy smokers :( and I already spent hours to clean this piece of 90&acute;s - original, it has some further issuers I resolved already (described in the german board).</p> <p>Does anybody have a guidance for me, how to replace the rubber band ? </p> <p>The teardown of the mechanic is the one I need help for, the rest is easy for me now ;-) </p> <p>Thanks in advance/Regards</p> <p>Tom</p><div style="clear:both;"></div>