https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/311658.aspxThu, 27 Jan 2011 14:44:32 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:311658stotty11110https://archivedforum.beoworld.org:443/forums/thread/311658.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=311658<p>Thanks Martin</p> <p>Hope to get to it tomorrow or over the qweekend</p> <p>Salut</p> <p>tony</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/311528.aspxWed, 26 Jan 2011 15:59:26 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:311528Dillen0https://archivedforum.beoworld.org:443/forums/thread/311528.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=311528<p>Sounds as if the tapehead does not rotate&nbsp;fully to it&#39;s correct positions.<br />Check if something is blocking or binding the rotation and/or if something<br />has been bent or similar when you replaced the belts.</p> <p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/311514.aspxWed, 26 Jan 2011 15:10:57 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:311514stotty11110https://archivedforum.beoworld.org:443/forums/thread/311514.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=311514<p>Ok so no suggestions</p> <p>Is it kaputt?</p> <p>Can it be repaired?</p> <p>Anyone out there who repairs these ?</p> <p>Anyone got a suitable replacement unit?</p> <p>salut</p> <p>Tony</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/311185.aspxMon, 24 Jan 2011 07:12:46 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:311185stotty11110https://archivedforum.beoworld.org:443/forums/thread/311185.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=311185<p>Mr Stupid here<img src="http://forum.beoworld.org/emoticons/37.gif" alt="Confused" />,</p> <p>Just replaced the belts on this deck, all works fine apart from the head positioning system&nbsp; -&nbsp; the unit picks up the tape etc then sounds like sound thro cotton wool, gently moving the head rotational to the limit of its travel,&nbsp;then it works fine, the system does not seem to rotate the head far enough in either direction!</p> <p>Any helpful suggestions out there apart from the obvious, wear boxing gloves and get a pro to sort it!!</p> <p>salut</p> <p>tony</p><div style="clear:both;"></div>