https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/311355.aspxTue, 25 Jan 2011 08:16:52 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:311355Step10https://archivedforum.beoworld.org:443/forums/thread/311355.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=311355<p>Yes the speaker wrecking party buttons are good candidates :) I will swap for now but I will not be happy!</p> <p>BTW I will get round to ordering the belt that I enquired about Martin but I am having to justify every penny spent atm so a cassette belt is doing the job for now, little too stretchy and doesn&#39;t settle down instantly but it&#39;s ok as a temporary solution!!!</p> <p>Thanks..</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/311263.aspxMon, 24 Jan 2011 16:29:47 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:311263Dillen0https://archivedforum.beoworld.org:443/forums/thread/311263.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=311263<p>Yes, you can swap the little bronze contact parts from some of the buttons<br />you never use (the high volume buttons 50 and 60 springs to mind), that<br />should be a very easy fix.<br />Inventing a new type of contacts just to solve this little issue<br />seems a bit out of proportion if you ask me. Finding a whole panel<br />in better condition from a donor could be an alternative but do<br />let us know how you fare.</p> <p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/311220.aspxMon, 24 Jan 2011 10:53:04 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:311220Step10https://archivedforum.beoworld.org:443/forums/thread/311220.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=311220<p>It&#39;s one or two buttons that have almost completly lost there bounce Martin, mostly the standby and volume buttons. I have tried cleaning but while they work you still do not get the tactile feedback that you do with the lesser buttons... I could swap the programming buttons over I guess there are about the same number but I wanted a &#39;new&#39; solution really...</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/311213.aspxMon, 24 Jan 2011 10:12:45 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:311213Dillen0https://archivedforum.beoworld.org:443/forums/thread/311213.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=311213<p>Won&#39;t a cleaning help ?<br />I like to take the panel apart, dismount the little bronze leaf spring contacts,<br />clean the board and the bronze parts from oxidation and dust and put it<br />back together.</p> <p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/311167.aspxMon, 24 Jan 2011 04:55:56 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:311167Step10https://archivedforum.beoworld.org:443/forums/thread/311167.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=311167<p>Has anyone found a solution for the worn pop buttons found in the 80&#39;s 6000? It is a handfull that are worn to the point that the panel had been pushed in slightly next to the standby button. Can&#39;t find a supplier of anything suitable but they must be available! Looked at 0.5mm SMT versions although haven&#39;t worked out if these would be a little too high, again cannot find a supplier atm.. </p> <p>The only other option I can think of is rather drastic and would involve drilling a hole in the board and counter sinking (or similar) a tactile switch to the require height - a lot of work and I would feel obliged to do all 23 buttons <img src="http://forum.beoworld.org/emoticons/03.gif" alt="Surprise" /></p><div style="clear:both;"></div>