https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/290231.aspxSat, 14 Aug 2010 09:36:29 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:290231burantek0https://archivedforum.beoworld.org:443/forums/thread/290231.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=290231<p>Well, that is it. Some equal pressure on the board inwards and then a pull to the outside. There should be six &quot;engagements&quot; -pairs on top, center, and bottom. When putting back together -watch the alignment of the pin connectors towards the inside of the machine.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/290212.aspxSat, 14 Aug 2010 07:13:02 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:290212Mikemaxcel0https://archivedforum.beoworld.org:443/forums/thread/290212.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=290212<p>From a glance it seems an easy task with a sideward force would do&nbsp; the job but in reality it`s rather difficult to have the board disengaged from the positioning-mounting clips.Is there any special trick to have the job done in a easy way?</p> <p>&nbsp;</p><div style="clear:both;"></div>