https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/286446.aspxSat, 24 Jul 2010 11:04:43 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:286446Die_Bogener0https://archivedforum.beoworld.org:443/forums/thread/286446.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=286446<p>It&#39;s quite the same problem like the BL7000. Caps on the lower board... caps with dirty&nbsp;black feet. <img src="http://forum.beoworld.org/emoticons/16.gif" alt="Whistle" /></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/286431.aspxSat, 24 Jul 2010 07:10:25 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:286431nitro20https://archivedforum.beoworld.org:443/forums/thread/286431.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=286431<p>i have tried removing the bl7000 from the room , but the problem with the bl5000 remains.</p> <p>&nbsp;</p> <p>so i assume it would be a bl5000 problem .</p> <p>&nbsp;</p> <p>it looks like it needs to be woken-up ......................</p> <p>&nbsp;</p> <p>&nbsp;</p> <p>nitro2</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/286302.aspxThu, 22 Jul 2010 09:27:42 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:286302Beobuddy0https://archivedforum.beoworld.org:443/forums/thread/286302.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=286302<p>Is it possible that the BL7000 interferes with the BL5000? Does it make any difference if you cover the BL7000?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/286220.aspxWed, 21 Jul 2010 15:44:55 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:286220nitro20https://archivedforum.beoworld.org:443/forums/thread/286220.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=286220<p>Hi forum ,</p> <p>&nbsp;</p> <p>I have a bl5000 which has a irregular communication problem .</p> <p>&nbsp;</p> <p>Sometimes it is not possible to switch&nbsp;my bm7000 on , the only way to get the bl5000 to communicate again , &nbsp;is the use of another remote and then watch the bl5000 display to see if it cicks in.........</p> <p>Is this problem also caused by a capacitor issue like in the bl7000 ???</p> <p>&nbsp;</p> <p>If it is , who can give me info on this ????</p> <p>&nbsp;</p> <p>i have noticed there is not much documented about the bl5000</p> <p>&nbsp;</p> <p>&nbsp;</p> <p>any help is highly appreciated </p> <p>&nbsp;</p> <p>nitro2</p> <p>&nbsp;</p><div style="clear:both;"></div>