The Workbench

Re: Beogram CDX - Strange problem

Medogsfat — Tue, 22 Jun 2010 09:52:53 GMT

Craig - nothing to do with your CDX but I have sent you a PM.

Chris.

Re: Beogram CDX - Strange problem

Dillen — Sun, 20 Jun 2010 04:44:15 GMT

Yes, and I also have the Beocenter 2600 slider that you asked for in the other thread.

Martin

Re: Beogram CDX - Strange problem

Craig — Sun, 20 Jun 2010 04:21:44 GMT

Do you do a cap kit for these Martin?

Craig

Re: Beogram CDX - Strange problem

Dillen — Sun, 20 Jun 2010 01:59:23 GMT

Honestly, I would leave the motor alone until the caps and vias has been done.

Martin

Re: Beogram CDX - Strange problem

Craig — Sat, 19 Jun 2010 15:23:11 GMT

This ones not going to be a quick fix then. How easy is the motor to strip down? Done a few Beogram ones.

Craig

Re: Beogram CDX - Strange problem

Dillen — Sat, 19 Jun 2010 14:41:44 GMT

It's actually the other way around. The disc spins faster when reading the inner tracks, which
are the first on the disc.
But it could still be the motor control.

Replace capacitors, check for cracked solder joints at the power supply board etc. and loop leads
through the rivet vias on both the servo and decoder boards.
That will allow for a much more reliable diagnose - if needed by then.

Martin

Re: Beogram CDX - Strange problem

Peter — Sat, 19 Jun 2010 14:11:51 GMT

It's the motor - it spins faster as you go through the tracks and it can't spin fast enough for the final tracks. Needs the motor stripping down - Tim did mine!

Beogram CDX - Strange problem

Craig — Sat, 19 Jun 2010 11:58:38 GMT

Brought a CDX which was faulty. At first, if you put in a CD it would play the OK. Until you tried to go to another track. As you got further along the tracks. It would take longer for the selected track to play. Past track 7 or more, the disc would just spin but not play. Looking at the lense you could see a layer os dust on it. Cleaned the lense and it worked far better. Select a track and now plays straight away. What is happening now is that the it skips on the last two tracks. Tried a few CD's and they are all the same. They play fine in my BC9300 though, so it's not the discs. Even tried a one which I have only played ince before. Thats just the same too. It's as iff the laser is having problems the further is moves accros th disc.

Craig