https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/264247.aspxThu, 11 Mar 2010 14:11:11 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:264247ndaniels0https://archivedforum.beoworld.org:443/forums/thread/264247.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=264247<p>Hi,</p> <p>I had recently purchased a secondhand BeoSystem 2 Mk I and wanted to run it with my Apple TV. So I ordered an STB-C table update chip. There may even be an updated version as this one was marked Western 425! However having replaced the chip (I did use an antistatic wrist strap) I get no picture at all!! I&#39;ve tried going back to the old table chip but with the same result :-( Has any one else seen this sort of behaviour before? Is there anything else I could try? As far as I can see all of the modules are plugged together firmly. Any advice welcome.</p> <p>Nigel.</p><div style="clear:both;"></div>