https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/264606.aspxSun, 14 Mar 2010 11:44:46 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:264606Dillen0https://archivedforum.beoworld.org:443/forums/thread/264606.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=264606<p>You have a PM regarding belt.</p> <p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/263581.aspxTue, 09 Mar 2010 06:51:48 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:263581Ben0https://archivedforum.beoworld.org:443/forums/thread/263581.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=263581<p>I&#39;ll bare that in mind if I can&#39;t get the 200 ohm trimmers to set the idle correctly.</p> <p>How about a belt for the 3500&#39;s turntable?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/263577.aspxTue, 09 Mar 2010 06:18:44 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:263577Dillen0https://archivedforum.beoworld.org:443/forums/thread/263577.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=263577<p>I can supply&nbsp;correct 250 ohm trimmers if everything else fails.</p> <p>Martin&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/263571.aspxTue, 09 Mar 2010 04:34:00 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:263571Ben0https://archivedforum.beoworld.org:443/forums/thread/263571.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=263571<p>Thanks Martin, i&#39;ll get a couple ordered and we&#39;ll see if I can get it living again.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/263354.aspxSun, 07 Mar 2010 08:07:13 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:263354Dillen0https://archivedforum.beoworld.org:443/forums/thread/263354.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=263354<p>Yes,&nbsp;200 or 220 Ohm&nbsp;will be acceptable.</p> <p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/263300.aspxSat, 06 Mar 2010 13:34:49 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:263300Ben0https://archivedforum.beoworld.org:443/forums/thread/263300.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=263300<p>I&#39;ve been given a Beocenter 3500 that i&#39;m trying to get working as it should.</p> <p>Someone&#39;s been in there before and replaced the idle current trimpot for the right channel with one of completely the wrong value, and hence that side is idling at 1 amp!</p> <p>&nbsp;</p> <p>The original 250 ohm linear pot is not stocked at my usual sources, the nearest available is 200 ohm - would this be a good substitute?</p> <p>&nbsp;</p> <p>Ben</p><div style="clear:both;"></div>