The Workbench

Re: Datalink Wiring

joeyboygolf — Mon, 01 Mar 2010 13:15:38 GMT

ouverture:

aha, makes more sense now graham, thank you, I have a complete 5500 system in my bedroom, and the Ouverture in the small lounge downstairs, I have always wanted to connect a later model Beogram with MMC2 cartridge to my Ouverture

Then you will need a Beogram 3500, 4500, 6500 or 7000

Re: Datalink Wiring

ouverture — Mon, 01 Mar 2010 11:58:37 GMT

aha, makes more sense now graham, thank you, I have a complete 5500 system in my bedroom, and the Ouverture in the small lounge downstairs, I have always wanted to connect a later model Beogram with MMC2 cartridge to my Ouverture

Re: Datalink Wiring

joeyboygolf — Sat, 27 Feb 2010 18:32:44 GMT

I have a couple of Steve's turntable shelves in stock if he hasn't got any. Same deal as Steve charges.

The Ouverture does have datalink but the 3000 and 3200 do not.

For record decks with built in RIAA pre amp the datalink is on pin 7 of the din plug. Those decks are wired accordingly and are a simple plug in to suitable devices such as Beocenter 2300, 2500 or Ouverture, Beomaster 3500 or 4500 and Beocenter 9300.

For record decks without built in RIAA preamp the datalink is on pin 6 of the din plug and those decks are wired accordingly and are a simple plug in to suitable amps liked Beomaster 5500 or Beocenter 9500.

Re: Datalink Wiring

ouverture — Sat, 27 Feb 2010 09:35:37 GMT

good news, should not have worried about the Datalink pins

do you know if you are going to do another run of turntable shelves in the next few months Steve ??

Re: Datalink Wiring

Steve at Sounds Heavenly — Sat, 27 Feb 2010 08:42:31 GMT

Hi ouverture,

The Beogram 4500 is an excellent choice for use with an Ouverture, as it has a built-in pre-amp and will fit nicely on one of my turntable wall shelves (I'm hoping you have a wall shelf already, as they are out of stock at the moment!)

You don't need to worry about Datalink wiring with this combination of equipment, as the Beogram comes complete with the correct 7 pin DIN lead to connect straight into the Aux socket on your Ouverture. If you need any longer leads or adapters, please let me know and I will be happy to help.

Kind regards,

Steve.

Re: Datalink Wiring

ouverture — Sat, 27 Feb 2010 08:25:30 GMT

thanks Mika, the thread you pointed me to was great news !

Re: Datalink Wiring

tournedos — Sat, 27 Feb 2010 06:32:41 GMT

According to this old thread you should be able to get this to work with an Ouverture. Although I still don't know 100% sure which pin you should connect Won't break anything by just trying, though...

Re: Datalink Wiring

ouverture — Sat, 27 Feb 2010 05:49:58 GMT

I see, I guess I will have to make up two cables, one wired for Datalink and the other for "Audio Aux Link" and try them both out on my Ouverture with whatever turntable I end up getting, the idea is to wall mount it with one of the "Sounds Heavenly" turntable shelves, ideally I want one that uses an MMCx cartridge and have built in RIAA, the Beogram 4500 seems to fit the bill

Re: Datalink Wiring

tournedos — Sat, 27 Feb 2010 04:08:47 GMT

The Datalink signal is carried in either pin 6 or pin 7 depending on the device.

If I can deduce from your nick name / avatar that you are trying to connect something to the upright family of music centers, I believe not all of them support Datalink through the AUX connector at all.

Datalink Wiring

ouverture — Fri, 26 Feb 2010 20:17:30 GMT

not sure who is right or wrong, but can anybody confirm for me, that the Datalink wiring is the same as the "Audio Aux Link" pins, which I thought they were, but I am now told that Pins 6 and 7 are different, which would seem a bit weird.

Pin No. Datalink Colour Audio Aux Link

Pin 1 Left Out Yellow Left Out

Pin 2 GND Shield GND

Pin 3 Left In Blue Left In

Pin 4 Right Out Red Right Out

Pin 5 Right In Green Right In

Pin 6 Data Ground Black Datalink

Pin 7 Datalink White Not Used