https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/221935.aspxSun, 16 Aug 2009 15:44:23 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:221935Peter0https://archivedforum.beoworld.org:443/forums/thread/221935.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=221935<p>The originals are the easiest way to go as the cross over (such that it is!) and the cabinet will be designed around this unit. </p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/221914.aspxSun, 16 Aug 2009 11:25:40 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:221914Frans0https://archivedforum.beoworld.org:443/forums/thread/221914.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=221914<p>Hi.</p> <p>I have recently purchased a set of alu CX100 that I am about to refurbish. I have ordered the refoam kit from good HIFI, and I need to change the tweeters as well as they are blown.</p> <p>I have read many threads about bass driver refoam/replacement, but nothing about the tweeters - so therefore this thread</p> <p>My local B&amp;O dealer can get originals for around 35&euro; a piece. Though I am curious, if anyone have other experiences with tweeter replacement at all. Is there any other (cheeper/better) solution than getting the originals and is there anything else I should be aware of?</p> <p>Thanks.</p> <p>-Frans.</p><div style="clear:both;"></div>