The Workbench

Re: L4500 (Unity chassis) storing AV modes.

FergusonTX — Thu, 14 Jun 2007 15:28:55 GMT

Hello Chris,

Thank you for that information- I have now been able to store the changes!

Now all I have to do is hope that all of the epoxy glue I have had to use on the plastic

framework holding the PCB's holds as I put the case back on! I assume that the heat

over the years had made the plastic very brittle- lots of breaks as I moved the boards.

Thanks again, best wishes , Mark.

Re: L4500 (Unity chassis) storing AV modes.

ProGram — Wed, 13 Jun 2007 10:58:34 GMT

Hi!Storing the settings you made is "play" and leaving the menu without storing is "stop". But when you have a B&O product connected, it should be recognized by itself and it has to be connected to the mains first, and then the tv-set.Chris

L4500 (Unity chassis) storing AV modes.

FergusonTX — Wed, 13 Jun 2007 08:40:28 GMT

Hello All,

I have just obtained and repaired an L4500 TV. However, I cannot work out how

to store changes to the AV settings. I can get to the menu giving a block diagram

of what is on AV1 and AV2 - and can change them, but cannot store the changes.

Which remote control buttons need pressing to store the changes?? Thank you.