https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/218430.aspxWed, 29 Jul 2009 04:29:33 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:218430blong0https://archivedforum.beoworld.org:443/forums/thread/218430.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=218430<p>Ok Jason - it happens to us all sometimes! Well done. Cheers = Brian (Northumberlland)</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/218348.aspxTue, 28 Jul 2009 12:31:57 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:218348jasonkjyap0https://archivedforum.beoworld.org:443/forums/thread/218348.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=218348<p>Got it fixed.&nbsp; Was connect the cable wrongly...</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/218191.aspxMon, 27 Jul 2009 11:02:42 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:218191blong0https://archivedforum.beoworld.org:443/forums/thread/218191.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=218191<p>Hi there in Singapore = If your BC2 has been powered off for some time, you will need to re-enter the 4-digit pin code to reawaken the socket unit. Have you tried this, already?&nbsp; Also, you could try entering the service code ie press the double left-pointing arrows three times then enter 11111.&nbsp; There is lots of service info in the products section, if you are able to go there - follow the links. Good luck = Brian (Northumberland)</p> <p>&nbsp;</p> <p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/214717.aspxSun, 05 Jul 2009 21:01:50 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:214717jasonkjyap0https://archivedforum.beoworld.org:443/forums/thread/214717.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=214717<p>My Beocenter 2 not power up after moving to my new house. <br /><br />Master unit is connected by cable to socket unit and power on, but master unit did not show up the RED light. </p> <p>My socket unit caught some rain water during the moving. Could it be the problem? <br /><br />I am using blower to dry it now..</p><div style="clear:both;"></div>