https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/205578.aspxFri, 22 May 2009 14:29:55 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:205578BegBeo0https://archivedforum.beoworld.org:443/forums/thread/205578.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=205578<div style="text-align:left;" id="result_box"> <div style="text-align:left;" id="result_box">Hello again, Beolab Penta som are OK = 300 Ohms and the Beolab Penta with error had = 275 Ohms. </div> <div style="text-align:left;"></div> <div style="text-align:left;"></div> <div style="text-align:left;">What do you think?</div> </div> <div style="text-align:left;"></div> <div style="text-align:left;"></div> <div style="text-align:left;"></div> <div style="text-align:left;">regards</div> <div style="text-align:left;"></div> <div style="text-align:left;"></div> <div style="text-align:left;">Jan</div><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/205507.aspxFri, 22 May 2009 04:18:28 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:205507BegBeo0https://archivedforum.beoworld.org:443/forums/thread/205507.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=205507<div style="text-align:left;" id="result_box">Thank you for your prompt response will look at it today and hear from me again how it was.</div> <div style="text-align:left;"></div> <div style="text-align:left;">regards </div> <div style="text-align:left;"></div> <div style="text-align:left;">Jan</div><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/205505.aspxFri, 22 May 2009 04:12:56 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:205505Die_Bogener0https://archivedforum.beoworld.org:443/forums/thread/205505.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=205505<p>No standby LED?</p> <p>Then either the fuses are defect, there are 2 of them... 1x for the standby transformer and 1x for the power amp.</p> <p>Check with an ohmmeter wether there is some resistance on the power cord, there should be something around 300 Ohms. If there is a open loop, then the fuse or the standby transformer is gone...</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/205503.aspxFri, 22 May 2009 04:06:11 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:205503BegBeo0https://archivedforum.beoworld.org:443/forums/thread/205503.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=205503<div style="text-align:left;" id="result_box">I am very sorry I wrote wrong, I have no stand-by, even if the fuse is ok.</div><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/205502.aspxFri, 22 May 2009 03:57:37 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:205502Die_Bogener0https://archivedforum.beoworld.org:443/forums/thread/205502.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=205502<p>Hi,</p> <p>how is the Penta connected to the amp? PowerLink or Cinch or Speakerlink?</p> <p>Could be a defekt Powerlink cable. Or wrong source selected...powerlink used, but line selected.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/205496.aspxFri, 22 May 2009 03:35:44 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:205496BegBeo0https://archivedforum.beoworld.org:443/forums/thread/205496.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=205496<div style="text-align:left;" id="result_box">Hey, guys, have a Beolab Penta 2 <div style="text-align:left;" id="result_box">No stand-by - Fuses located in the bottom part is OK</div> Does anyone have knowledge which mistakes are behind this error.</div><div style="clear:both;"></div>