https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/191548.aspxThu, 19 Mar 2009 13:15:49 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:191548pauel0https://archivedforum.beoworld.org:443/forums/thread/191548.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=191548<p>Suppi - das nehm ich mal in Angriff.</p> <p>&nbsp;</p> <p>W&auml;r schade um das Teil.</p> <p>&nbsp;</p> <p>Danke ersma!!</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/191542.aspxThu, 19 Mar 2009 13:06:58 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:191542ablaumeise0https://archivedforum.beoworld.org:443/forums/thread/191542.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=191542<p><blockquote><div><img src="https://archivedforum.beoworld.org:443/Themes/beotheme1/images/icon-quote.gif"> <strong>pauel:</strong></div><div></p> <p>...where do i find the regulators ??</p> <div style="clear:both;"></div> <p></div></blockquote></p> <p>Wie Martin bereits&nbsp;geschrieben&nbsp;hat - das sind die Teile die an den K&uuml;hlrippen befestigt sind. Einfach mal durchmessen ob die noch mit dem restlichem Board in Kontakt sind.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/191538.aspxThu, 19 Mar 2009 12:50:36 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:191538pauel0https://archivedforum.beoworld.org:443/forums/thread/191538.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=191538<p>...where do i find the regulators ??</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/191536.aspxThu, 19 Mar 2009 12:44:49 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:191536Dillen0https://archivedforum.beoworld.org:443/forums/thread/191536.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=191536<p>Check the voltage regulators and their solders.<br />I&#39;ve seen cases where the whole section with voltage regulators and<br />the cooling fin had broken away from the rest of the board during shipping.</p> <p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/191533.aspxThu, 19 Mar 2009 12:40:04 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:191533ablaumeise0https://archivedforum.beoworld.org:443/forums/thread/191533.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=191533<p>In dem Fall kommt du ohne Serviceunterlagen wohl nicht viel weiter.</p> <p>Irgendwas auff&auml;lliges zu sehen? Ausgelaufene Kondensatoren?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/191524.aspxThu, 19 Mar 2009 12:18:17 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:191524pauel0https://archivedforum.beoworld.org:443/forums/thread/191524.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=191524<p>No standby - keine Lampe.</p> <p>&nbsp;</p> <p>Strom gemessen - bis zu den Sicherungen neben dem Trafo alles oki.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/191522.aspxThu, 19 Mar 2009 12:10:58 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:191522ablaumeise0https://archivedforum.beoworld.org:443/forums/thread/191522.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=191522<p>If there is no sign of life at all (no standby dot?) I would guess there is a fault in the power supply.</p> <p>Usually the reason for this are bad caps.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/191515.aspxThu, 19 Mar 2009 11:47:23 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:191515pauel0https://archivedforum.beoworld.org:443/forums/thread/191515.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=191515<p>Hi there!!</p> <p>&nbsp;</p> <p>Got a&nbsp; CD50 from ebay...... this fine machine seems to be completely dead.</p> <p>&nbsp;</p> <p>No display, no function.</p> <p>&nbsp;</p> <p>But in extremely good condition....;-))</p> <p>&nbsp;</p> <p>Any ideas???</p><div style="clear:both;"></div>