https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/185399.aspxMon, 23 Feb 2009 10:41:32 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:185399McMurphy0https://archivedforum.beoworld.org:443/forums/thread/185399.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=185399<p>Mr.Die_Bogener on the maiboard I replace IC4=TDA8124 (geometry controller), but nothing change.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/185395.aspxMon, 23 Feb 2009 10:33:22 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:185395McMurphy0https://archivedforum.beoworld.org:443/forums/thread/185395.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=185395<p>Dear Die_Bogener,</p> <p>&nbsp;</p> <p>Did you mean this caps:</p> <p>C52-2200uF x 16V</p> <p>C44, C46, C120, C121, C131, C134-470uF x 25V and 63V</p> <p> C48, C130-1uF x 50V</p> <p>C14, C137-22uF x 10V</p> <p>C29, C42-100uF x 40V and 100V</p> <p>C61-2,2uF x 50V</p> <p>I replace this caps but nothing change.</p> <p>&nbsp;</p> <p>Please give me more advice.</p> <p>&nbsp;</p> <p>Kalev</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/184617.aspxThu, 19 Feb 2009 15:45:31 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:184617McMurphy0https://archivedforum.beoworld.org:443/forums/thread/184617.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=184617<p><b> </b></p> <p>Thank you for your reply.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/184570.aspxThu, 19 Feb 2009 12:19:55 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:184570Die_Bogener0https://archivedforum.beoworld.org:443/forums/thread/184570.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=184570<p>Replace all electrolyth caps on the mainboard. </p> <p>5x 470uF 16V</p> <p>1x 2200uF 16V</p> <p>1x 470uF 100V</p> <p>2x 1000uF 35V</p> <p>2x 1uF 35V (use Wima MKS-2-5 instead)</p> <p>2x 22uF 35V</p> <p>1x 100uF 40V</p> <p>1x 2,2uf 50V (use Wima MKS-2-5)</p> <p>and 2 further caps i dont remember...</p> <p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/184464.aspxWed, 18 Feb 2009 19:12:53 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:184464McMurphy0https://archivedforum.beoworld.org:443/forums/thread/184464.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=184464<p>Dear B &amp; O fans,</p> <p>Sorry, my bad english.</p> <p>My MX6000 in service mode <span style="text-decoration:underline;">I&#39;cannot adjust horizontal amplitude, geometry in the corners and the sides</span>).</p> <p>I change transistor TR33(BU2508DF) and free caps C100 220uF 16V, C102 6,8nF 1600V, C101 2,2nF 1600V.</p> <p>But nothing change.</p> <p>&nbsp;</p> <p>Please give me a good advice</p> <p>&nbsp;</p> <p>Best regards,</p> <p>Kalev</p> <p>&nbsp;</p> <p><img alt="" /></p><div style="clear:both;"></div>