https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/179395.aspxSun, 01 Feb 2009 06:36:31 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:179395BeoMeowth0https://archivedforum.beoworld.org:443/forums/thread/179395.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=179395<p>alright, it seems like it fixed itself...&nbsp; The cabling was pure hell though, i&#39;m just glad i finished it.&nbsp; Took me like&nbsp;4 hrs just to understand how the cables were working, and anohter 2-3 hrs just to put it together</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/179228.aspxSat, 31 Jan 2009 14:40:06 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:179228BeoMeowth0https://archivedforum.beoworld.org:443/forums/thread/179228.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=179228<p>ah, it was getting too late last night.&nbsp; I meant the glass doors do not respond to my motion.&nbsp; only if i push them apart a little bit where I can press a button then the doors slide open by themselves and it will close a moment later.&nbsp; However it does not open to my motion.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/179179.aspxSat, 31 Jan 2009 11:04:05 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:179179soundchoice700https://archivedforum.beoworld.org:443/forums/thread/179179.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=179179<p>Hi There,</p> <p>A warm welcome to Beoworld....</p> <p>Do you mean the CD clamper (the thing that opens to put the CD under?). If so this only opens when you press &#39;load&#39; on the control panel inside the glass doors, as I assume you are referring to.</p> <p>The glass doors are the only thing that opens based on movement in front of the unit.</p> <p>Trust that helps.</p> <p>Laurence.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/179140.aspxSat, 31 Jan 2009 07:28:01 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:179140BeoMeowth0https://archivedforum.beoworld.org:443/forums/thread/179140.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=179140<p>alright, after 5 hrs of hell on earth i got the glass sliding doors to work.&nbsp; However, now it doesn&#39;t listen to my motion.&nbsp; The cd door will only open if one of the button on the inside is pressed.</p> <p>I&#39;m assuming the module that controls the motor is fried?&nbsp; Since that&#39;s the only piece I touched.&nbsp; Anyone know where i can get anothe module?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/179091.aspxSat, 31 Jan 2009 02:45:09 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:179091BeoMeowth0https://archivedforum.beoworld.org:443/forums/thread/179091.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=179091<p>so I just opened it up, and it looks like one end of the cable is lose.&nbsp; But the cabling is mind boggling, anyone has a diagram or know how the cabling works?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/179086.aspxSat, 31 Jan 2009 01:18:58 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:179086BeoMeowth0https://archivedforum.beoworld.org:443/forums/thread/179086.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=179086<p>Hello, new to the forum.&nbsp; I just purchased a beolab 2300 off ebay, the seller shipped the item with the glass door installed on the unit.&nbsp; I opened the package and noticed the left door was sagging a bit, after powering it up, I can hear the motor trying to open the glass door and was struggling; so I gave it a gentle push to get the door opened.&nbsp; Now the door won&#39;t close and I have a cotton cable sticking out from the top of the unit.</p> <p>Does anyone know how to repair this?&nbsp; I&#39;m quit handy when it comes to electronic equipments, should I try to tackle this issue myself or would I be opening a whole world of hurt?&nbsp; The wire, seems to me, should be looped around some pully in the machine, however has come lose from it.&nbsp; Anyone know how to open one of these machines up?</p> <p>&nbsp;</p> <p>thanks!</p><div style="clear:both;"></div>