https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/166344.aspxSun, 14 Dec 2008 17:49:46 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:166344MrBob0https://archivedforum.beoworld.org:443/forums/thread/166344.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=166344Thanks!<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/166203.aspxSun, 14 Dec 2008 08:46:58 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:166203Peter0https://archivedforum.beoworld.org:443/forums/thread/166203.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=166203Agree with Graham - if they did not put it back together properly, it is their responsibility. The service manual is on site but I wouldn&#39;t do anything that they will then say caused the problem.<br /><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/166187.aspxSun, 14 Dec 2008 07:11:58 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:166187joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/166187.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=166187<p>There are no real adjustments one can make other to the lever mechanism.</p><p>If it has just left the repairers and they took it apart then they should put it back together properly. I would send it back to them at their expense!</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/166129.aspxSun, 14 Dec 2008 00:51:32 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:166129MrBob0https://archivedforum.beoworld.org:443/forums/thread/166129.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=166129<p>I am new to the Forum. I own a Beosystem 2500 which I have owned since new in 1993. I had a full home system. I have used the system continually and have moved and an now that I am close to retirement I am setting things up in my final domicile. I have also acquired a Beosound Overature for use in a separated site. My 2500 has been serviced by the local b&amp;o service center after I mucked up an effort to replace the window drive belt ( which I replaced once before without incident ). Since its return, the CD Load sequence does not fully close and as such, the CD touches the CD clamp. Slight pressure on the&nbsp;clamp will allow the CD to play fine. In fact, it may play several CD&#39;s without incident and then revert to the binding.</p><p>All this B/S to ask if there is an adjustment for the CD closing mechanism or do I need to get a second mortgage to return to the repair center. </p><p>&nbsp;MrBob</p><div style="clear:both;"></div>