https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/126471.aspxMon, 30 Jun 2008 15:15:33 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:126471madskp0https://archivedforum.beoworld.org:443/forums/thread/126471.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=126471I am working on the paintjob rigth now and I was wondering if it would be a good idea to change the capcitors in it while i have it open?<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/124823.aspxSun, 22 Jun 2008 08:51:59 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:124823madskp0https://archivedforum.beoworld.org:443/forums/thread/124823.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=124823<p>Hi Peter</p><p>&nbsp;Thanks for the suggestions. Could you send me that font?&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/124817.aspxSun, 22 Jun 2008 08:04:24 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:124817Peter0https://archivedforum.beoworld.org:443/forums/thread/124817.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=124817<p>You can do one of three things:</p><p>Mask the logo - it will look rotten. </p><p>Use Letraset - I use Helvetica bold which isn&#39;t bad.</p><p>Use a transfer and then put a matt varnish over it. This is the easiest as you can print it yourself and make it whatever size you wish. It will proobably be noticeable in certain lights. If it is Beofrutiger, I have the font.&nbsp; <br /></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/124810.aspxSun, 22 Jun 2008 07:16:35 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:124810madskp0https://archivedforum.beoworld.org:443/forums/thread/124810.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=124810<p>Just bought a cheap Beowox Cona. It has been mistreated&nbsp;a lot so it needs some plastic padding, sanding and a paintjob. The problem is I would like to preserve the Bang &amp; Olufsen logo on it. As I see it there are two possibilites. </p><p>1. mask the existing logo when I paint it. I&#39; am just afraid there will be a noticeable coulor difference in&nbsp;the&nbsp;white paint where the maskin is.</p><p>2. make a new logo. But&nbsp;how. Has anyone tried something like this before? Is the textfont available somewhere?&nbsp;&nbsp;&nbsp;</p><div style="clear:both;"></div>