https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/124082.aspxWed, 18 Jun 2008 06:43:44 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:124082nobby0https://archivedforum.beoworld.org:443/forums/thread/124082.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=124082<p>Yes, this would appear to be the most common failure mode of these.</p><p>There is a good possibility that the power supply/line drive IC has died.&nbsp; These are no longer available, but the one out of the MX3000 will work.&nbsp; You should also consider changing the line output transformer as this is likely to have reached the end of its life and failure of this can ruin the new IC.</p><p>&nbsp;</p><p>Neil</p><p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/123976.aspxTue, 17 Jun 2008 14:10:01 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:123976madskp0https://archivedforum.beoworld.org:443/forums/thread/123976.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=123976I just accuired a MX2000 TV set for free. But it is not working. The stand by LED is on when i plug it in, and when i press one of the channel buttons the selected channel number is shown in the little display in the top. But there is no picture. It&#39;s like the tube isn&#39;t turning on. Does anyone know if this is a common problem with this model and if there is an easy solution?<div style="clear:both;"></div>