https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/120360.aspxSun, 01 Jun 2008 13:43:29 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:120360joostdeclercq0https://archivedforum.beoworld.org:443/forums/thread/120360.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=120360<p>Hi all,</p><p>&nbsp;I found on the Beotech site that there are 2 wires labeled &#39;datalink&#39; in an audiolink cable.&nbsp; Can you just connect them to an relais, to switch on and off the airport express, or is an IC needed, which translates the codes?</p><p>&nbsp;I&#39;m afraid the answer will be the last option...<br />&nbsp;</p><p>Kind regards</p><p>Joost Declercq<br />&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/118531.aspxTue, 27 May 2008 05:33:14 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:118531joostdeclercq0https://archivedforum.beoworld.org:443/forums/thread/118531.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=118531<p>Hello,</p><p>I&#39;m one of the many, who has linked an Airport Express to his B&amp;O.&nbsp; But I don&#39;t like the fact that the AE is on all the time.&nbsp; So, I would like to use the signal on the Audiolinkcable of Tape 2, to control a relais, which does the job of swithing on an off.</p><p>As I had a dead Airport Express, I&#39;ve resurrected it (<a href="http://echoone.com/airport-express/" title="Fix an Airport Express" target="_blank">resurrect a dead AE</a>).&nbsp; So, I have easy access to the 5V power supply of the AE.</p><p>Is it doable with a relais?&nbsp; Which wire in the audiolinkcable should I need and what kind of signal gives the audiolink?</p><p>Kind regards</p><p>Joost Declercq</p><div style="clear:both;"></div>