https://archivedforum.beoworld.org:443/forums/42.aspxAdvanced Technical Forum for discussion of Bang & Olufsen products at component level.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/119799.aspxFri, 30 May 2008 12:57:11 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:119799Beolab10https://archivedforum.beoworld.org:443/forums/thread/119799.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=119799Thanks a lot Friedmett, but I just found one this week!<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/119768.aspxFri, 30 May 2008 10:31:43 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:119768Friedmett0https://archivedforum.beoworld.org:443/forums/thread/119768.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=119768<p>Get in touch with Dillen.</p><p>I gave him my former 220 volts BG8000 transformer about 3 weeks ago and it was a working one just that I did not need it anymore.</p><p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/115194.aspxThu, 15 May 2008 07:23:03 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:115194Beolab10https://archivedforum.beoworld.org:443/forums/thread/115194.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=115194<p>Thanks Martin! It think it will be pretty difficult to find a 220 V transformer, since all the models that you mentioned have become so rare. But i&#39;ll take up the challenge.</p><p>&nbsp;</p><p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/115127.aspxThu, 15 May 2008 00:26:24 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:115127Dillen0https://archivedforum.beoworld.org:443/forums/thread/115127.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=115127<p>Yes, the transformer is a plug-in module. You need to get a 220-240V transformer module to replace the 110-120V one you have.</p><p>The transformer pushes up from&nbsp;under the Beogram when the aluminum lid is open&nbsp;and the mains lead is gently guided out from the corner of the aluminum lid hinge.</p><p>The Beogram 6006, 8000 and 8002&nbsp;transformers are the same.</p><p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/114684.aspxTue, 13 May 2008 15:33:22 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:114684joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/114684.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=114684<p>Glad to help with the 7000 but I&#39;m afraid the 8002 is outside of my experience. I&#39;m sure Dillen will be able to help as I believe he takes these apart with his eyes closed!</p><p>Good Luck with it.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/114682.aspxTue, 13 May 2008 15:24:38 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:114682Beolab10https://archivedforum.beoworld.org:443/forums/thread/114682.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=42&PostID=114682<div class="ForumPostContentText" id="ctl00_ctl01_bcr_ctl00___PostRepeater_ctl01_PostViewWrapper">With the help of Graham and the service manual on Beoworld,&nbsp;I turned a 120V Beogram 7000 into a 220V Beogram 7000, by changing the tappings and&nbsp;soldering a new powercord to the transformer. The fuse was&nbsp;already a 700mV, so did not need changing. Now it works perfectly. Thanks again Graham!&nbsp;</div><div class="ForumPostContentText"></div><div class="ForumPostContentText">Now another one: Can a U.S. Beogram&nbsp;8002 (120V)&nbsp;be modified to be a European Beogram&nbsp;8002 (220V) in the same way? I checked the Beogram 8002 service manual, but it looks a lot more complicated than the Beogram 7000 one.&nbsp;Thanks in advance for your suggestions!!! </div><div style="clear:both;"></div>