https://archivedforum.beoworld.org:443/forums/30.aspxA Forum for Technical Help and Support on Bang & Olufsen products over 25 years old.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/319854.aspxMon, 28 Mar 2011 02:41:06 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:319854tournedos0https://archivedforum.beoworld.org:443/forums/thread/319854.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=319854<p>No it&#39;s not. The update happens immediately when using a 2-way remote, since the Beomaster knows that it needs to reply so that the remote knows the command went through. This doesn&#39;t happen with a Beo4 as the airspace needs to be kept free so to speak, and the Beomaster broadcasts a status update to all remotes at its own leisure some time later.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/319808.aspxSun, 27 Mar 2011 14:52:09 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:319808pacificocean0https://archivedforum.beoworld.org:443/forums/thread/319808.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=319808<p>I have a BM 7000. When I use a BL5000 or BL7000 the remote signal from the BM7000 comes straight away. However when I use a Beo4 (with AV button) remote, the remote signal from the BM7000 takes about 5 seconds. This causes the information on the BL7000 takes 5 seconds to update after giving a signal from the beo4 remote. Does anyone know if it is possible to get rid of this delay?</p><div style="clear:both;"></div>