Vintage Products

Re: Remote controls on Beomaster 6000 (the "new" one)

j0hnbarker — Sun, 27 Feb 2011 16:42:40 GMT

You'll actually find that other remotes do work! I have been using a Terminal 3000 with my Beomaster 8000 for years now.

Re: Remote controls on Beomaster 6000 (the "new" one)

Søren Hammer — Thu, 24 Feb 2011 07:10:48 GMT

The Beolink converter is very rare, I would program a Beo5, Beo6 or a Logitech multifunction remote if you want to control all in your home

Re: Remote controls on Beomaster 6000 (the "new" one)

.......... — Thu, 24 Feb 2011 06:59:00 GMT

As far as I know the 6000 remote and the Beolab 8000 terminal are the only two that work with this.

There was some kind of retrofit to make the modern remotes work with these but I'm not sure how available they are! (Only ever seen one on eBay!)

Re: Remote controls on Beomaster 6000 (the "new" one)

Blackrix — Wed, 23 Feb 2011 17:15:35 GMT

As far as I know they don't work on BeoMaster 6000.......

Re: Remote controls on Beomaster 6000 (the "new" one)

jrantala — Wed, 23 Feb 2011 11:51:17 GMT

Yes, I know that they are the "correct" remotes for the BM6000 but I have understood that the Beocenter remotes also should work - at least partially. Am I totally mistaken here ?

-jari

Re: Remote controls on Beomaster 6000 (the "new" one)

Friedmett — Wed, 23 Feb 2011 07:36:36 GMT

You will need the optional Beosystem 6000 remote or Beolab 8000 but I do recommend the first one.

http://radioogtveksperten.dk/tilbehoer-44/fjernbetjeninger-46/beomaster-terminal-6000-344.html

Remote controls on Beomaster 6000 (the "new" one)

jrantala — Wed, 23 Feb 2011 05:46:51 GMT

I have an old Beomaster 6000 ("new", not the old 4ch one!) which I am restoring right now, and have a question on the IR remote control.

Should a Beocenter Control Module (for Beocenter 7000) work for this or not ? I have one and it doesn't (and it does work with my Beocenter 7000 though). In an old thread I just read that it should work, or was it only the Beocenter Terminal (for Beocenter 7007) that should work ?

So, question is, has my Beomaster 6000 some issues in the IR receiver board (yes, it does have one!) or do I need another remote ?

-jari