https://archivedforum.beoworld.org:443/forums/30.aspxA Forum for Technical Help and Support on Bang & Olufsen products over 25 years old.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/313938.aspxFri, 11 Feb 2011 00:29:10 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:313938nycbrg0https://archivedforum.beoworld.org:443/forums/thread/313938.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=313938<p>Now why didn&#39;t <b>I</b> think of that? Brilliant, and thanks!</p> <p><a title="Big Smile - <img src="http://forum.beoworld.org/emoticons/02.gif" alt="Big Smile" />"><img border="0" width="19" height="19" alt="" /></a></p> <p>Brian</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/313922.aspxThu, 10 Feb 2011 17:36:25 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:313922Step10https://archivedforum.beoworld.org:443/forums/thread/313922.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=313922<p>Ah yes, a trick even B&amp;O have used, how clever! Will a standard two-part epoxy stick ok to the plastic?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/313905.aspxThu, 10 Feb 2011 16:46:49 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:313905Dillen0https://archivedforum.beoworld.org:443/forums/thread/313905.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=313905<p>Grind off the remains of the clips.<br />Glue on screws with cylindrical heads of apprx 2.5mm height to the backside<br />of the panel (where the clips sat), standing on their heads.<br />Fit the board with nuts to the screws.</p> <p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/313904.aspxThu, 10 Feb 2011 16:38:00 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:313904nycbrg0https://archivedforum.beoworld.org:443/forums/thread/313904.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=313904<p>Thanks, Olly. I&#39;ve only three servicable clips and they are on the ends. Makes the whole works mushy, especially lower right &#39;GO&#39;. Looking for a replacement I think.</p> <p>Brian</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/313884.aspxThu, 10 Feb 2011 14:45:09 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:313884Step10https://archivedforum.beoworld.org:443/forums/thread/313884.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=313884<p>I did have a think when servicing my keypad, as three of the clips were broken, but it wasn&#39;t enough of a problem to give it a great deal of thought!</p> <p>I might go back to this because I would like to replace the switches altogether, you can hardly feel the tactile response from some of the switches, which I suspect is very similar to along with the cause of your situation!</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/313747.aspxWed, 09 Feb 2011 19:45:39 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:313747nycbrg0https://archivedforum.beoworld.org:443/forums/thread/313747.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=313747<p>Anyone have a creative fix for a operating panel that has the majority of it&#39;s plastic pc retaining clips broken? I guess more pressure when the key doesn&#39;t work is not always the answer!</p> <p>Brian</p><div style="clear:both;"></div>