Vintage Products

Re: Beomaster 2400-2 Bulb change

Dillen — Tue, 25 Jan 2011 16:37:54 GMT

Yes, a kit exists. You have a PM too.

Martin

Re: Beomaster 2400-2 Bulb change

Leslie — Tue, 25 Jan 2011 16:01:29 GMT

Is there a lamp kit available for a Beomaster 1900. Looks like mine could be brighter, not sure though!

Re: Beomaster 2400-2 Bulb change

Dillen — Tue, 25 Jan 2011 10:09:17 GMT

Sure, PM to you !

Martin

Re: Beomaster 2400-2 Bulb change

stevesx — Tue, 25 Jan 2011 08:51:32 GMT

Hi Martin, can you tell me cost etc and how to pay you for the kit.

Kindest regards

Steve

Re: Beomaster 2400-2 Bulb change

Blackrix — Sun, 23 Jan 2011 11:51:56 GMT

I would also replace all 15 lamps. It is not the first time that someone replaced just the defective lamps to find out that after the BeoMaster was put together again another lamp is broken. R Simply replace all of them and have fun mounting the front of the BeoMaster after the repair.... Maybe you should also have a look at the capacitors, they also might need replacing and since you already have to disassemble the BeoMaster to change the bulbs. Dillen can probably also supply a capacitor kit!

Re: Beomaster 2400-2 Bulb change

Dillen — Sun, 23 Jan 2011 10:50:51 GMT

kevineads, you have a PM regarding the lamp kit.
Check your inbox inthe top right corner of this webpage.

Martin

Re: Beomaster 2400-2 Bulb change

kevineads — Sun, 23 Jan 2011 10:41:02 GMT

How do I purchase these?

Re: Beomaster 2400-2 Bulb change

Dillen — Sat, 22 Jan 2011 02:38:38 GMT

Welcome to Beoworld !

I can supply a lamp kit for the Beomaster 1900 and 2400 models.
It contains a full set of fresh panel lamps (plus a spare) of correct
type and wattage, which is important in this Beomaster since most
of the lamps work as vital parts of the electronic circuitry.
The kit comes with detailed (dis-)assembly instructions (english text and photos).
Basic electronic tools (soldering) is required to replace the bulbs.

I agree with Søren in changing them all in one go. It will bring equal
light output to the panel and since the lamps filaments becomes brittle
with age and use, more of the lamps will unavoidably go bad from
service vibrations.

Martin

Re: Beomaster 2400-2 Bulb change

Søren Mexico — Fri, 21 Jan 2011 20:45:35 GMT

As Eugene says, its easy, in the manuel on site there is a good description on how to open the magic box, desolder and solder the lamps is easy, and change all of them, new ones are brighter than the old ones.

Re: Beomaster 2400-2 Bulb change

Eugene — Fri, 21 Jan 2011 16:06:41 GMT

You might want to replace all the bulbs. they are 15v 1 w. leaded style so you will have to solder new ones in and desolder the old ones out.

There are kits available with instructions on how to do it. Not really a hard job.

Beomaster 2400-2 Bulb change

stevesx — Fri, 21 Jan 2011 14:37:26 GMT

I have a bulb gone on FM1 and i don't know how to open the case up to change it. Any help would be fantastic

thanks steve