Vintage Products

Re: beogram 6002 - stylus pressure adjusting part

fgwemmel — Wed, 10 Mar 2010 05:24:46 GMT

Thanks Martin, I've found it (the cursor is so discreet and usualy hidden when the tonearm is on the right side). Thanks again for such a quick answer.

Freddy

Re: beogram 6002 - stylus pressure adjusting part

Dillen — Sun, 07 Mar 2010 15:56:38 GMT

Welcome to Beoworld !

The tracking force is set using the pointer at the right side of the tonearm.

Martin

beogram 6002 - stylus pressure adjusting part

fgwemmel — Sun, 07 Mar 2010 13:25:19 GMT

Hi,

I have bought a old Beogram 6002 in a second hand market (22 Euro !!!). A nice vintage turnable.

After cleaning, oiling and tuning everything (following the service manual that I have download on the net), it works fine.

The only problems I have are :

1) the lamps indicating the RPM 33 or 45 are not very bright : I have still to check the voltage

2) I don't see any stylus pressure adjusting part, except the counter balancing weight wich is to be place so that the arm is floating when the pressure is set to 0 gr. I think that there a part lost lost.

Could somebody send to me a picture or a drawing of this part, with, if possible, some dimensions, so that I could make a one by myself ?

(I could find a little balance to mark the scale).

Thank you very much