Vintage Products

Re: Beomaster 2400 - No bass/treble lights

Søren Mexico — Mon, 16 Jan 2012 12:28:18 GMT

If you look at our avatars on the left you can see our locations, I'm Mexico city Martin is Copenhagen

Re: Beomaster 2400 - No bass/treble lights

RHM — Mon, 16 Jan 2012 11:32:09 GMT

Thanks. He did reply to me with instructions on how to order. Where do you live? Where does Martin live? I live in California, USA, near San Francixco.

Re: Beomaster 2400 - No bass/treble lights

Søren Mexico — Mon, 16 Jan 2012 00:43:55 GMT

RHM:

Thanks, I did that. Does he maintain a separate web site for his parts orders, or is it always done through the forum, just as I have done?

As far as I know, Martin does not have a website, he will contact you through the mail address you provided to the forum, you and him can then agree on other ways of corrosponding if you wish. I have another mail address for Martin, but do not know if he want that on the forum.

Re: Beomaster 2400 - No bass/treble lights

RHM — Mon, 16 Jan 2012 00:30:47 GMT

Thanks, I did that. Does he maintain a separate web site for his parts orders, or is it always done through the forum, just as I have done?

Re: Beomaster 2400 - No bass/treble lights

Søren Mexico — Mon, 16 Jan 2012 00:20:14 GMT

Go to the link, on the left side look for options, choose "start a conservation with Dillen", a new window will open, there write your subject and text, click send, Martin will answer.

Re: Beomaster 2400 - No bass/treble lights

RHM — Mon, 16 Jan 2012 00:10:34 GMT

Thanks for the fast and friendly reply. I went to the site you included in your answer, but all I could see was another forum page with some discussions about Dillen and nothing about ordering parts kits. I will look again, but does Dillen maintain his own web site for such orders?

Re: Beomaster 2400 - No bass/treble lights

Søren Mexico — Sun, 15 Jan 2012 22:58:21 GMT

Welcome to the forum, where nothing gets old, the lamp kit you can buy from Martin (Dillen) here, if you did not make a cap change and check the trimmers, I recommend to order also a cap kit and check the trimmers and order these too.

I buy frequently from Martin and can recommend him, the kits arrives with clear instructions.

Martin, as a high count poster, has problems posting on the forum, I think we will have to wait for him until we get the forum on a new server, but mail him and you should be able to order.

Re: Beomaster 2400 - No bass/treble lights

RHM — Sun, 15 Jan 2012 21:46:11 GMT

I realize this discussion is a bit old now, but could someone provide the details on how to buy the lamp kit with instructions? I have a Beomaster 2400 where the bass light is out.

Thanks.

Re: Beomaster 2400 - No bass/treble lights

mormel — Sat, 09 Jan 2010 21:10:44 GMT

Very cool Martin, maybe I got the wrong impression indeed. Bad experiences with people who "know" B&O stuff after a while ;). Glad you cleared up the sky for me.

But as I said before.. It always was clear to me you're doing a great job helping out people :)

cheers

Re: Beomaster 2400 - No bass/treble lights

Dillen — Sat, 09 Jan 2010 12:49:45 GMT

Bart,

Sorry if I have left you with a wrong impression.
I am not running a business, I don't have a shop and I am not making any
money on the kits. That's what I have my 8-16 job for and that's
not electronic related.
The overhead of a kit is typically about one pound, made so simply because
I can't justify to lose money - and that's not counting the trip to the postoffice.
Check the cost of the correct types of lamps, often custom produced in small quantities,
VAT, two times shipping, packing and eventual customs and you will see.
The kits were put together for pure convenience. After answering the same
questions and diagnosing the same faults over and over through many years,
kits were put together and the owners told to simply grab a suitable one
and it will solve their problem. This leaves me with more time for dealing
with other issues and stubborn repairs.

People who had their stuff repaired here will also confirm that I am
definitely not doing it for the sake of money.
That would indeed be a bad business.
B&O was always a hobby for me. I would like to see all the old B&O stuff
up and running and I especially like to dig into problem cases and items that
were deamed hopeless by other repairers.

When I told you why you should get the correct lamps, it was merely out of pure
knowledge and experience and to help you avoid some of the problems that I have seen myself.
Even if it is 30 years or more ago, I still clearly remember mounting wrong
lamps according to the service manual myself and afterwards wondering what
was going on, until finally looking up the tech sheets.
The cases are still to be found in my own red book of experience, written in capital letters.
You are welcome to mount whatever you feel for. I have given you my best advice
and will be happy to do so again, should the need arise.

Martin

Re: Beomaster 2400 - No bass/treble lights

jgunzelman — Sat, 09 Jan 2010 12:26:39 GMT

I too bough the kit from Martin. It was my first electonics repair. Not only were the instructions invaluable, but when I got it back together and something was not right, he resonded to an email inquiry, was absolutley correct with the answer and I had it fixed in no time. Thanks again Martin!

Re: Beomaster 2400 - No bass/treble lights

mormel — Sat, 09 Jan 2010 10:30:35 GMT

I don't doubt your integrity Martin. I think you're doing a great job offering people to help and repair their precious B&O machines.

I also understand that this is your business to sell/repair this stuff and therefore can't share everything you know (I don't mean you're not willing to help members out with questions and repairs). I would do the same thing if it was my business. I have my own steel construction plant and I won't learn just anyone to weld or tell them where I order my steel. That would me take out of my job.

This forum is helping me so now and then and you're helping me out as well of the things you write here. Thnx for the effort you make.

Bart

Re: Beomaster 2400 - No bass/treble lights

Dillen — Sat, 09 Jan 2010 04:28:07 GMT

Well, the only references I have are the service manuals plus correction sheets and
updates, 35 years of experience in collecting and servicing B&O audio stuff and
the tech info sheets released from B&O to their authorized repairshops.
Not much, I must admit.

You are happy, that's the most important thing.

Martin

Re: Beomaster 2400 - No bass/treble lights

mormel — Fri, 08 Jan 2010 12:35:14 GMT

You're probably right of course, but as I said, I have no strange behavour (even the tuning indicator is working fine) of the machine and the light intensity is simular to what I remembered as it should be. I don't use the 2400 on a daily bases, so I just needed a cheap quick fix and it just did the trick for me anyway, maybe I'm just lucky.. We'll see how long it will last :).

Re: Beomaster 2400 - No bass/treble lights

Dillen — Fri, 08 Jan 2010 08:51:51 GMT

Unfortunately, 12V 30mA is stated in error in some early service manuals but does not correspond to what's factory mounted in
the Beomasters.
They will not give correct function to the tuning discriminator lights, typically leaving the two just lit up showing nothing at
all and, since they don't provide the correct load on the 15V supply, they will in many cases cause the Beomaster to turn off
by itself intermittently and/or make it hard or completely unwilling to go into standby or change to specific sources, depending
on the general state of the rest of the Beomaster.
B&O issued a tech note about this.

They will also give different light output since some of the Beomasters lamp circuits are balanced and current controlled where
others are just supplied from a plain analogue source so it won't look as the designers intended.

I've had Beomasters sent to me for service where the only faults was that wrong wattage lamps or lamps of different wattage
were mounted.
The lamps mormel link to are cheap china types, not high quality long-life types and they will
require replacing quite often.
Some of the lamps in this series of Beomasters are living a fairly hard life and if the load on the supply is
too light, which it will be if mounting lamps with too low wattage, the voltage will be too high and lamp life
will be short.
Plus they won't fit into the lamp holders, which again will allow them to vibrate ever so slightly and their filaments will
become brittle in no time.
People, who owned Beomasters through the 1970's and 80's, will remember that lamps were an everlasting head-ache,
and that was because the owners bought the cheap lamps supplied by radioparts dealers instead of spending a little more
and buy the correct and better ones from a B&O dealer.

I recommend you use long-life types only and of the correct wattage. Preferably types capable of handling a continous 15V DC, since
many B&O lamps are slightly overrun and will stay lit for hours. The three balance/treble/bass lamps are always fully lit when the
Beomaster is powered on and they form part of the electronic switch circuit, decharging the 15V secondary at switching off.
Correct lamps can be hard to find and the typical cost is about EUR 3/each (a little cheaper if you buy 10.000 pcs.) but
are, as J0hnbarker also suggests, available as a kit which also comes with instructions.

Martin