https://archivedforum.beoworld.org:443/forums/30.aspxA Forum for Technical Help and Support on Bang & Olufsen products over 25 years old.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/222129.aspxTue, 18 Aug 2009 14:00:26 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:222129joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/222129.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=222129<p>PCB43 under the front glass</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/221946.aspxSun, 16 Aug 2009 19:43:01 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:221946Evan0https://archivedforum.beoworld.org:443/forums/thread/221946.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=221946<p>Where are these test pins located?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/221911.aspxSun, 16 Aug 2009 11:05:15 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:221911joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/221911.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=221911<p>I have answered this in the main forum!!!</p> <p>The Li battery is goosed and that should be changed before looking any further.</p> <p>&nbsp;</p> <p>I guess that the pins in question are the ones to initiate test mode and they certainly won&#39;t cure this problem.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/221849.aspxSun, 16 Aug 2009 00:05:07 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:221849Evan0https://archivedforum.beoworld.org:443/forums/thread/221849.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=221849<p>What pins did you short?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/221765.aspxSat, 15 Aug 2009 04:08:03 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:221765johnsok10https://archivedforum.beoworld.org:443/forums/thread/221765.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=221765<p>Hello,</p> <p>I have been given a beocenter 9500, which has never been used, and is still in it&#39;s original box, with instructions etc. </p> <p>I plug it in, and it says CODE, I&#39;ve read a bit round here, and found out about putting a code in via the handset, but this didn&#39;t work.</p> <p>coming back to the forum, people mentioned looking for a pin to short, found this, shorted it, but still nothing.</p> <p>After a while of saying code, this dissapears, and all the lights come on, but the tape &amp; cd deck have opened, and will not close.</p> <p>Any ideas, or do I need to take this into a dealer to get them to fix it, and if I do, any idea how much it will cost me?</p> <p>thanks</p> <p>Kevin</p><div style="clear:both;"></div>