https://archivedforum.beoworld.org:443/forums/30.aspxA Forum for Technical Help and Support on Bang & Olufsen products over 25 years old.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/197001.aspxThu, 16 Apr 2009 02:45:10 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:197001Dillen0https://archivedforum.beoworld.org:443/forums/thread/197001.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=197001<p>I have new motors but check first if the motor gets any power at all.<br />About 12-14V should be expected.<br /><br />Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/196980.aspxWed, 15 Apr 2009 19:15:42 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:196980jayzjayz660https://archivedforum.beoworld.org:443/forums/thread/196980.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=196980<p>Hi Martin,</p> <p>This is George . I was wondering if you know where I can find a motor for the Beocord 8000 ? Or maybe you have one and if so how much do you want for it ?&nbsp; Please let me know.</p> <p> Thank you </p> <p>George</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/196422.aspxTue, 14 Apr 2009 22:25:53 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:196422Andrew0https://archivedforum.beoworld.org:443/forums/thread/196422.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=196422<p>lubrication somewhere inside the cassette deck mechanism.</p> <p>i would suggest getting the service manual and pulling out the mechanism and giving everything a good clean. i used circuit board cleaner/contact cleaner to remove the old grease which had dried and gone quite hard and then relubricated with a new grease... fixed all my problems.</p> <p>Andrew</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/196257.aspxMon, 13 Apr 2009 16:11:45 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:196257Dillen0https://archivedforum.beoworld.org:443/forums/thread/196257.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=196257<p>Voltage on motor ?<br />Motor fuse blown ?<br />Motor blown ?</p> <p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/196247.aspxMon, 13 Apr 2009 15:25:04 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:196247jayzjayz660https://archivedforum.beoworld.org:443/forums/thread/196247.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=196247<p>I recently bought a Beocord 8000 which was working perfectly.</p> <p>The other day I went to play a tape and it keeps kicking it out of play mode and I also don&#39;t hear the motor running .</p> <p>The belts are new .</p> <p>Any ideas ?</p> <p>George</p><div style="clear:both;"></div>