https://archivedforum.beoworld.org:443/forums/30.aspxA Forum for Technical Help and Support on Bang & Olufsen products over 25 years old.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/151519.aspxSun, 26 Oct 2008 08:43:43 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:151519Dillen0https://archivedforum.beoworld.org:443/forums/thread/151519.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=151519<p>The trimmer has fallen apart, replace it - and and oterh trimmer of the same type - and readjust to factory specs.</p><p>The garbled display&nbsp;is a different issue, not related to neither the motor/belts nor the trimmers. Check that all cables are on correctly and the connections between the display and sound control boards are good.</p><p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/151247.aspxSat, 25 Oct 2008 06:42:40 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:151247jethwaj0https://archivedforum.beoworld.org:443/forums/thread/151247.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=151247<p>Hi - I&#39;ve had problems with my Beocord and beleived the proplem was related to a known issue of worn belts, so changed them (Thanks Martin).</p><p>But it seems i&#39;ve not completly resolved the problems..hence this post. &nbsp;The display is showing strange things and the tape deck engages but then stops straight away...Please help!</p><p>While I replaced the belts I noticed there is a resistor (I think) that is missing... see attached.</p><p><a href="http://docs.google.com/View?docID=dhssz7f3_0fp7sxwdg&amp;revision=_latest">http://docs.google.com/View?docID=dhssz7f3_0fp7sxwdg&amp;revision=_latest</a></p><p><a href="http://docs.google.com/Doc?id=dhssz7f3_4hnfcjv6r">http://docs.google.com/Doc?id=dhssz7f3_4hnfcjv6r</a>&nbsp;</p><p>Whay do you suggest?</p><p>Thanks, Jay&nbsp;</p><div style="clear:both;"></div>