Vintage Products

Re: MX 5000 motorised stand

solderon29 — Thu, 25 Sep 2008 15:22:05 GMT

If your BV5000 has nicam fitted,it should work with the stand.There are no menu's for the stand with this set,you just press PICTURE then the left/right or up/down keys,depending upon which handset version you have.

You also may need to programme the tv to option 1 and option 5.

Regards,

Nick

Re: MX 5000 motorised stand

joeyboygolf — Thu, 25 Sep 2008 14:49:49 GMT

Did all MX5000's have stand software included in the chip? Somewhere in the distant past I seem to remember changing a chip for this very reason. Or was that a 5500?

nobby will know for sure. Suggest you pm him.

Re: MX 5000 motorised stand

Medogsfat — Thu, 25 Sep 2008 10:36:20 GMT

Welcome to Beoworld, and thank you for supporting the site with your silver membership

There is a correct sequence for attaching a motorised stand so the TV recognises it. Start from scratch by unplugging the stand from the TV then disconnect the power to the TV. Plug the stand cable back into the TV then restore power.

Chris.

MX 5000 motorised stand

gus01 — Thu, 25 Sep 2008 09:09:59 GMT

Cannot seem to get the stand option to come up in the picture menu

Have checked relevant circuits for supplies and dry-joints stand checked on another set and is ok

Can anyone help?