https://archivedforum.beoworld.org:443/forums/30.aspxA Forum for Technical Help and Support on Bang & Olufsen products over 25 years old.enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/129005.aspxThu, 10 Jul 2008 07:53:24 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:129005Friedmett0https://archivedforum.beoworld.org:443/forums/thread/129005.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=129005<p>If it&#39;s Beovox X types then find some better speakers like the Beovox S-45. </p><p>Beovox X series are B&amp;O&#39;s most horrible sounding speakers. The 2000 sounds good though.</p><p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/128964.aspxThu, 10 Jul 2008 03:20:03 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:128964Peter0https://archivedforum.beoworld.org:443/forums/thread/128964.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=128964I take it that it is the 80s BM2000. Sounds like it is the protection circuit working. I would check the speakers cables and make sure that there is no short or poor connection. Martin is obviously wondering about the load of the speakers - if they are both very difficult to drive, the amplifier will try to protect itself. It probably needs a service - new capacitors and some variable resistors - they do gradually go out of spec and may well cause symptoms as you describe.<strong><br /></strong><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/128956.aspxThu, 10 Jul 2008 01:15:46 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:128956Dillen0https://archivedforum.beoworld.org:443/forums/thread/128956.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=128956<p>Welcome to Beoworld !</p><p>What brands and models of speakers do you have ?</p><p>Martin</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/128943.aspxWed, 09 Jul 2008 20:34:44 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:128943julene0https://archivedforum.beoworld.org:443/forums/thread/128943.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=30&PostID=128943Thanking you in advance for any help anyone might be able to give me. I recently purchashed a Beomaster 2000 and after plugging in my second set of speakers I immediately lost some volume. I can not get the volume to go above 40 and when I keep trying to push it more the receiver turns off completely. &nbsp;When using only one set of speakers everything works wonderfully. What should I do. Thanks again.<div style="clear:both;"></div>